Beardown

here you are GReddy.eps GReddy.eps

Are you talking about cutting the vinyl like five said or are you talking about weeding( the parts of the vinyl that you do not want within the graphic that you cut)?

yes it can....

So like this ....

KEN was also having surgery this week ... he was hoping to get back today ...hold tight I am sure they will be with you soon

You can post the website because people may buy it ..... What you do is up to you .....some people may want to buy them post it or just post a copied pic.... I highly doubt that "stick People are cpoyrighted ..hell my 4 year old can draw them

yes you got it ......clear application tape I only use when I sell to my wholesaler decals ...When I apply graphics I will only use the application mask for doing wet applications ....I would recommed getting some application mask and trying again using the wet method it will blow your mind on the differance

I dont hardley waht at all after I have gotten all the air bubbles out ...wait 2-3 min and then I spray the masking application tape to losen up the hold it has on the vinyl, I srpay that generously wait one more min and it practily falls off ....leaving the vinyl adheard to the application surface .... no waiting wet apply .... WHERE THE HELL IS BILLY ?

yup i use a razor blade down the grooves as well

http://stores.ebay.com/uscutter heres 4 pages

If you purchase from thier website the 1 year warranty is Included at no charge...If you purchase from EBAY then you get a 30 day Warranty for no additional charge ....However with the EBAY Auction you can purchase a 1 year warranty for an additional $50.. and yes you receive the same software if you purchase either way ..... Last time I checked this was how it was ......

here you go dub.ai Prodrive.eps dub.ai Prodrive.eps

how about if I just say the mother in law is making them .....I hope they would take her ..........

try roland pnc1000

Start>right click My compute>Manage> Device Manager>Com ports ..... Check which one your using and see if it is working properly

Well your com ports are up to you and your computer ...If you were cutting from com3 in signcut then you should have no problem with Signgo .... I can remember what I used when I had the demos ....but try the eh setup and see what it does ..... so I would say use com3 and the eh drive

I would look at getting something from the movie ants ...the circus ring leader is a flea ..maybe you could try to find some clip art of him ..... just an idea ..if i get some time I will look into it

ArtCut deals with MM's not inches John .... I tell you what SignGo is awsome and you can download a free trial to use untill you get the software you ordered ..... In the words of missing Billy just my .02 cents ....

This is what I am thinking ..she bought the cutter when Artcut was bundled ..... didnt like Artcut because it does not have inches ....so she purchased Signcut and has not received it ....

What is the software???

I think Fivestar just found his new Advatar ... ! ! !

yeah i fyou have a large mouth bass that would be great !!!

Well I will tell you what ..I just cut out a logo that has so much detail it is unreal (at least a hundred small circle cuts)....so what I did was like I said moved the blade holder up on the Blade arm and set the pressure up higher so it wouldnt stick for that split second ,,,, I have been cutting for an hour and a half with no further problems with the cuts not being closed .... So it looks like the problem is fixed ...when I get some more time I will go and look to see what more the issue was ... I do know this that when I pressed up on the arm that it made a little sqeek noise ...which I am sure that something is rubbing ohh so very slightly ,,,, that made it stick for a second and that made the cut not closed ... I was just wondering if you knew of something that needs to be lubed on the blade arm itself?? If so that would seem that I need to do that ... But As of now it is working like it should itis just hitting hard because I have the forse set to 280 grms ,,,, I am sure that it is fine that way I am just not useto it .... No biggie but when you get a sec ...is there something that needs lub eon the arm ....Thanks Well Good thing out of this if someone has a problem with cuts not being closed.... you can start with this first now ....very simple fix ...!! Down

Ok latley my cutter is not cutting closed cuts ...Letter , graphics everything is not closing...here and there ..... not just one graphic ..though sadly to say all of them ,,,,, When cutting it will hover like it is cutting when it should be dropping down ... I slowed it down ,,, da da da da da ....

OK well It cuts it like it should now ....Except that I am having to use 340 grams of pressure when I normaly use 50- 60 grams of force .... It sounds like a hammer coming down !! Ouch ! ! but I should have enough time to finish what I am supposed to do for yesterday ! So this is what I need ... 1 why is it sticking ? 2. How Do I fix this ? 3. ! Why is it sticking ! Banner & Five & Small Fry..... Thanks for all the Help .. I really apperciate it ! Not overlooked one bit ! Man Beer time may have to come just a lil bit early today ! Thanks Again Guys Ken?