altereddezignz
Members-
Content Count
41 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by altereddezignz
-
As soon as i hit sent the pen or the blade will drop and make a small cut about an 1/8 inch long . Just a straight line. I ahve attached a pic of it next to the bottom of the H with a marker so you can see it. Using flexi pro 8.6 v2
-
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
Well they woke back up and now I know why. When I activate the knife blade offset it starts. I think it has to do with the software making a small cut to pre align the blade for the first cut. This cut is never inside of my design it is always exactly where the origin is marked. When using my plotter for plot fill you can't ever tell that you have blade offset set o not so now when I am using the pen I just select pen as my tool and it is pretty programmed with the knife offset off. When I use the blade I just select knife. This has bitterly drove me crazy. Haha -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
Strange thing is i have done that once before so im not sure if maybe i got a bad install or something maybe. -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
Ok so i get home and i think ok i am going to download and install the drivers one more time from us cutter for flexi and now boom problem has gone away. Been playing with random cuts or plots this afternoon and all is good. Marks are gone. -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
updated the driver off of uscutter website. -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
This is my computer at work and i only installed it so i could look while at work. Pay no attention to the setting that are listed b/c mine at home are not the same. This is not the computer i cut on. I am at work i only installed the program for these reason to look at setting and study while at work to figure out the issue. -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
yeah driver based i guess -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
oh and i am using the LIYU cut driver for the us cutter sc model. -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
They will not support it other than in email. Called them 3 times. They do not even remote or phone support version 10 now either. I asked about the remote log in and he simply said im sorry but product support for version 8.6 is available by email only. Production Manager Right click on your plotter and go to default job properties. click on the cutter icon on the top left of screen. cutter options at the bottom of the page. This is my computer at work and i only installed it so i could look while at work. Pay no attention to the setting that are listed b/c mine at home are not the same. -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
What about on your cutting tools properties? like is it set to pen, or knife or none? I have no idea why it does this. Its about aggravating. I do ahve a dumb question but do you have team viewer? have ya log into my computer or vice versa and compare the notes or maybe facebook chat while going through them sometime. There has to be something set up by default that is making this happen. -
Ok so I have a see through picture frame that I need to put the vinyl on the back side of it so that it is smooth. Any ideas on this. If I just mirror the image the vinyl apply and looks funny Bc of the sticky side.
-
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
Same here.i also set up in the property manager and in my computers device manager the properties for hardware to match also?.. I have uninstalled, re installed and so on. I even had the issue years ago when i had flexistarter 8.5 so i am at a loss. -
Hello eveeyone. Ok I have tried using sharpie marked Bc with a little tape they fit well in the sc series plotter.my bobble is they bleed through the paper. Copy paper 15x24 blank sheet paper. I jave tried 1 down pressure also moving the head just at where tip touches. Fast slow all the same. I am unable to find actual markers that fit crayon markers are to fat and the holder is far from closing or letting the latch even grab. Any ideas.
-
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
Really? What plotter are you running and are you using serial or usb connection? -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
I wish scalp would have a pen fill option. I would use it for everything too.... -
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
So for some reason The guys at sai called me back about flexi. They do not support 8.6 or 10 on the phone only email. He also stated that there was no way or reason for the software to cut a small line at the start of a job??? UMMMM yes there is b/c it does. It has happened on both my plotters. So here is my question. Is there anyone out there using flexisign pro v 8.6 . I would like to look at setting and things like that to compare. I even had another plotter with flexi 8.5 starter and it did the same thing so i am really confused..... -
markers or sharpie for sc series
altereddezignz replied to altereddezignz's topic in General discussion
This is not for things i do all the time. Just for special occasions, When i want a specific look to something. I just want to be able to do it when i want to. I have a 24" cannon color plotter for printing. -
markers or sharpie for sc series
altereddezignz replied to altereddezignz's topic in General discussion
I wish lol. Yes I know this probably sounds like I am being picky but there has to be something out there somewhere. -
markers or sharpie for sc series
altereddezignz replied to altereddezignz's topic in General discussion
The no bleed ones work great but takes forever to get a conplete fill on the design. I'm not just using them for the outlines put also filling the colors. -
markers or sharpie for sc series
altereddezignz replied to altereddezignz's topic in General discussion
We have a hobby lobby local so I'm going to see if they have something that will fit. If I could figure out an easy way to get it to close or clamp shut the crayon short markers are perfect but they are to fat. -
markers or sharpie for sc series
altereddezignz replied to altereddezignz's topic in General discussion
I'm needing multiple Colors tho is the o lyrics problem. I use pen fill plot in flexi a lot. I mean the sharpies work fine but bleed so bad. -
I know to pass the coat on but I have a bunch of family members I want to do them for and just looking for a cheaper alternative.
-
Yes and no. I jave been doing the double pain glass for a while now bit it gets expensive when your doing 4-5 a week.
-
Hmm never really thought about it.
-
small cut or mark when at the stat of a job
altereddezignz replied to altereddezignz's topic in Flexi
Well i use flexi for a lot of pen plot filling and such. I have done very detailed work VERY detailed work on flexi but the only thing to ever bug me is that fact of the small cut. I guess it aligns the blade in the correct direction to start cutting but it puts a nasty mark on anything i pen plot fill with..... UGH...