Tom@USCutter

Administrators
 View Profile  See their activity

  • Content Count

    41

  • Joined

  • Last visited

  • Days Won

    1

Posts posted by Tom@USCutter

  1. Posted

    Hello -

    At US Cutter we offer several different Oracal Masking products depending on which form of paint you are going to be laying down. I will attach you a link to our Spray/Stencil section of our vinyl sales.

    http://www.uscutter.com/StencilSpray_c_180.html.

    Cutting this material out is very simple and will probably use the same software you are currently using. Are you currently using the Robo Master Pro software? If not let me know which cutting software you are currently using.

  2. Posted

    One common issue we have seen with Graphtec contour cutting involves the registration marks being placed too close to the actual cut. We have found by pulling away the registration marks from the image the machine can better recognize the marks. Our typical rule of thumb for placing the registration marks would be about 1" at the minimum from the image. This also will depend on how large the image is, and what the dimensions of the sheet you are using. What size of media are you using?

  3. Posted

    Hi Tom,

    Welcome to the forum. I have a simple task for you. Could you find out why the Cutting Plotter Controller will not come up on the Vista 64 bit and what does the new 2.20v firmware correct. I run the FC8000 series. I tried pulling it up on the Graphtec site but no reading results. Thanks.

    I will look into this further - I have never heard or seen of issues before with this so I will definitely look into a few things and point your questions in the right direction! I appreciate everyone being so welcoming, and I would agree that Graphtec's are some of the best produced machines on the market and require almost no support.

  4. Posted

    Hello everyone - you are going to begin to see me around the forums much more lately so I thought I would introduce myself. My name is Tom and I am an employee of US Cutter. I have been assigned to monitor this section of the forum and also provide support and help with anything Graphtec related. I am always here to help, and I will try to be as active as I can be. If you have any questions about anything related to graphtec feel free to pm me. Hello all and I look forward to helping you with anything graphtec related.