-
Content Count
1,161 -
Joined
-
Last visited
-
Days Won
18
Posts posted by mfatty500
-
-
Ms Sketter, it did get me going also . Thanks for your help as well, learn something new everyday.
-
Thanks Dakota that was it the problem was in Flexi, not the cutter. I swear on my parents graves I have never been in that window of production manager.
-
well, it is cutting with controller, i guess i can tough it out.
Thanks for all your help, you to dakota
-
speed and force are ok, but the condition changes to 9 with the controller should the status light keep blinking?
-
usually 10-15 yes hitting enter, this is the first time this unit has given any trouble in 5-6 years
-
i'll try it
Thanks
-
blade issues, that's when noticed my setting were not right i probably changed them but did not notice til today
-
then that is a no, all controlled from the cutter I just used it this morning and it was not cutting well, then I noticed that the settings were all screwed up so that is when I reset.
-
as far as I know, can you clarify? nothing has changed except for me changing defaults, I have changed them before with no issues. I don't think it can be anything serious as it does not change in the GP command.
-
8.6, windows 7, I reset it to factory defaults because all my conditions were all screwed up. I don't remember changing any settings so I reset it.
-
sorry, yes as soon as I send the job to the cutter, it only does it while I'm using flexi, normal when changing command to GP for Corel
thanks.
-
I have a Graphtec ce-5000-40, I reset to factory defaults, but the speed keeps changing to 50 in HP mode, in GP mode it works fine. I can not find any info in the manual.
Thanks Mike
-
I do not like clean cut blades as they don't last any longer than the cheap blades as I cut 99.99% glitter heat press vinyl, my supplier does not carry them anymore, that is why I am asking for them. thanks. Thanks for the references. Money is no object.
-
Where are you getting the china made blades from?
-
sorry i do not know anything about that software, it should be in your cutting software, hopefully somebody will chime in here or do a search of this forum.
-
Sounds like you have to much blade extended, try backing the blade back a little and reduce the force and do 2 passes. Also are the circles symmetrical? Sorry i do not anything about that cutter. Hope this helps.
Mike
-
and he has not been back since. markk that is
-
Go to the Funeral home that handled the funeral for you and ask to get into a grief counseling program that they offer. Most of them have them these days.
-
I am having problems also, using r-tape AT60 with Matte White FDC 4200 series it will not pick it up, but I had some of the same tape that was 2 years old and it picked it up. I am wondering if it is the FDC? The tape will pick up avery, oracal, etc. Any suggestions are welcomed.
Thanks
Mike
-
If you can't find the font just retrace the numbers? The font in the photo is good 'ol brush script.
-
already have a few of them, thanks
-
Anything to do with Baton Twirling.
Thanks
Mike
-
Ack!!
in Vectorizing
what is it? put it up here maybe someone has it. quit beating around the bush!
-
atta boy!
need some help
in Fonts
Posted
Does it need to be that one? There are many athletic fonts available.