rgaskins

Just thought I would toss this out there, anyone having a problem with Flexi and the PNC-1000 driver....I'm using the SmarTrac I S60 driver and it seems to work great... Rick

I was just thinking, my Refine did this the first time I used it but I installed the ground cable and never a problem again...Also, you might want to check the cut speed...I like to cut slowly....Just a thought...Hope you get it working! Rick

Yea I got to agree Flexi is nice...I also use Winpcsign, not to bad but still its not Flexi...

I have this cowboy logo I'm playing with I can seem to get this wright...Looks fine in wireframe but just cant figure out what is wrong...Thanks for any help... Rick cowboy.eps cowboy.eps

Rv, that worked great! Thats what I was trying to do also, just couldn't get it to work for some reason...Thanks SO much for the help!!! Rick

I have a computer with two sata hard drives in a raid 0 setup...The mother board is shot...I was wondering if there is a way to get some files off the hard drives...I know with a regular drive you can install it or put it into a external case and get the info...But with it being a raid setup I'm just not sure...Thanks for any help, I figured this would be a good place to start asking.... Rick

Dion, thats kinda what I was thinking also....I'm going to try to find a motherboard, it is a old one so it may take a while to find one...Thanks so much for your reply!!! Rick

Nice cards eveyone...Cody thanks for the link...I need some cards like you guys, darn those are nice!

Congrats!!!! Wait till he gets two like my daughter, into EVERYTHING!!!! Then when they get sixteen like our oldest daughter, driving and boys LOL...She thinks I'm a human atm machine....

I have a Refine 1351 cutter...It usually rests in the corner untill I need something big cut...I have tried a couple of different softwares, Flexi, Winpcsign and the software it came with Artcut...It will not respont to any of them...I also have a Pcut that works with all the software...So I have ruled out cables being bad with the Pcut working great...It wont respond to serial of lpt ports...Pcut works on all ports...Anyone got any ideas? I'm hoping something hasn't went bad... Rick

LOL...That was easy, found the old Refine Serial, set it to com2 and away she went...Thanks everyone!!! Rick

I sure am...Now that might be it!!! How would I tell the difference between the too? Thanks Fivestar!!! Rick

I'm having a problem and just can't seem to figure it out...When I'm trying to cut the black part of this the silver stays...When I try to cut the silver things are just right...I'm loading some photos so maybe someone can help me out...Thanks

Ok great...Thanks for all your help!! Rick

That was just what I wanted..Wonder what I did to cause this problem? I would love to know so I don't do it again...Thanks all for taking time to help! Rick

Hi you guys are fast! Anyway, yes it is a two layer graphic...Also, I havn't figured out how to right click on the grey and uncheck visable...Maybe because I'm using the starter version of Flexi? Thanks so much!! Rick Midstate.ai Midstate.ai

Jenn, Your exactly right for the layered graphics...I usually use registration marks to make sure the line up just right..Also, you may want to use the "wet" method when doing this to make it easer...I really cant help you with Signblazer, but should be done easy... Rick

Wow, that was my first plotter, got it back in late 2003 or the first of 2004...Darn good cutter used it over and over...I paid $2400.00 for it back then, geez how they came down in price...Anyway, I have a 54" Refine Now and also the Creation Ct630...I really like the Creation models.... Rick

Not sure if you tried this yet, but you may want to read this post... http://forum.uscutter.com/index.php/topic,3362.0.html There is some GOOD info there about blade setup.... Rick

bluffton/hilton head island 3 mile from the atlantic ocean thanks for the coments Cool, I'm in Darlington right near the Nascar speedway...I do go to Myrtle Beach most every weekend though, not too far from you... Rick

Looks great! Area code (843) that is my are code too...Must be near each other...

Good deal...Thanks John!

Anyone know if it is safe to use say a 25' serial cable on a Creation and Refine cutters? Wanting to move my cutters into another room from my front office...Thanks for any help... Rick

One more question please...Will a regular DB9 cable work or do I need the null type? Thanks Rick

Wow! Dang thats a long way...Thanks for the info guys...Thanks! Rick