Soul Reaper

what are the specs on the motor housing that will tell you your cycle time.

i want that 4 my wall. mabey on a business card. lol

great job keep us posted.

WOW. i would have never thought some would use linux. That is awsome. i have linux on PS3 PS2 with 250gb hd Xbox With 250gb hd How is linux on the pc any problems. I have an older computer i was wanting to do it on. got any pros and cons?

sweet thanks. i will try when i get to the shop.

Maybe the person is looking for the Ford Thunderbrid logo?

that is pretty slick. so you are going to do on site design. that it going to be sweet i dont think anyone here in my state does that.

wow guy to pricey for my tast. check this site out. if you are going to do it start out cheaper if you can http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=42202 i got one for me doing auto work and i have had it for 4 years now. all i have done is got new sand

So i could have done that instead of taking her to dinner? Man i should have thought of that. real nice work. I give you a "A++"

any demo designs that i could try doing. Also it was more like on the excitement. lol, I love the thermal pressing. i have made so many shirts now. and then i did some for a Scrapbook expo. and she and the grils that wear them love them so she is giving me like 30 free tickets to the event. My wife was happy but me i said yea me i just ha a plotter no color system. one day i hope i have heard about contour cutting but don't know how. any video on that.

I always leave feedback as a seller as soon as I receive the money and still only get less than 25 percent of buyers leaving feedback with the new system the system seems be be just bragging rights. and who is better than the other guy

LOL just every hat i have got get a dual crease next to the center stitch.

i also do automotive repairs and paint cars. If you get a compressor there are a few things to ask 1) how often will you use it? 2) Are you doing this full time? 3) what kind of sand are you using? 4) you doing this in a closed system? The brand i use is Craftsman. i have 2 tanks the 1st one is 6hp 33gal oiless system. this is used when i paint cars. the oiless system will not put any oil through the lines ie. claener air the 2nd is a Ingersoll-Rand 60 gal. Industrial Air Compressor, Vertical Tank, 5 hp, 2 Stage Pump. this i use on all of my tools and long use tools. with the oillube system the oil sometimes blows into the lines. Not to good withdoing things that need to stay dry or oil free. like painting cars or sand. what ever you chose make sure you get a good inline air/water seperator. if you get a big tank run a short hose to the wall. usawally 1/2 inside diameter or larger. then run 1/2" or 3/4" copper pipe to your sand blasting box. when you run the copper pipe to the machine you need to figure every 8' of pipe need a 1" drope. so if you run a 32' run it needs 5" drope from the start point to the end point. where ever the out put of a air hook up is at point it up or at a 45 degree anlge. that way any moisture will not go into the equiptment it stays in the line. At the end of the run put a T connector. the up is for the connector. the down is for a pipe that goes almost to the floor with a ball valve. the ball valve is for when it gets moisture in the line it will run down to the end and collect in the down tube with the ball vavle. easy way to drain the lines. If you run asmall compressor do the same thing. the reson is that with the copper pipe that size you store more air and helps with the moisture as well. I have helped build one of these at the shop my old boss built. Just a few helpfull hints. sorry for the long explanation Soul Reaper

it is a pain to change out but thats what we got. the real question is does the stand alone have the same curve? Also what hats can be used? or is it just the press kit i got?

i figure i would ask this here. got this machine http://www.uscutter.com/6-in-1-Heat-Press_p_1176.html And i cant find any hats that work with it. at least the 5 panels. it leaves creases in the middle of the hat. also where would i find a good place to get mugs? THXS, S.R.

high guys, I have right now a US Cutter 24" laserPoint. i love it a lot. The problem is that it is at my work. The other problem is My Lovely wife is into Scrap booking. My wife is sees how easy it is to cut things out so she wanted to get that stupid cricut machine. I said no. So i was told i need to buy something like that for her B-Day. I want something Bigger if i buy something i want it to do everything. I want it to be able to cut sandblasting material, and thick poster board and stuff. My boy will need it to do school projects and stuff. I found this on the internet. http://www.screenprintingsupplies.com/Seiki_SK-870T.htm please tell me what you think. Also how is flexi starter software? i have signcut pro at work here. It is not bad but am still learning the software's i run. The stuff i run is Adobe Illustrator 3 inkscape Corel Draw 3 Signcut Pro I run the stuff off my laptop. that way i can take the work home with me when needed. Thanks for the input. I am looking to spend around $1000.00 + or - i hear the Graphtec CE 5000 is great but will it cut the thick stuff. also what about the ZenCut Black I want to buy something once and only once. so i want to buy a good one now instead of later. THXS, Soul Reaper

thanks all, so now i am torn between Graphtec or zencut black.

ok that video was sick. know i just need to learn how to make a design i can do that with

that worked Kimon. would have never thought something that simple would do that. but always check the simple stuff first. thats what i do when i work on cars, check the simple stuff first. thank you, Nick

Hello, I am new to all of this if some one could vectorize this for me it would be helpful. Also what software is good to vectorize in. I have Adobe Suite set. Mainly us AI. Also use Inkscape and Corel Draw X3. just got this recently and still learning. THXS, Soul Reaper

Mark-s thank you that is perfect.

SteveB thanks that will work. I am learning how to trace but it is taking awail to learn all the controls. Soul Reaper

sounds good if i have a big project but this is for my store. anyone one else have anything?

Hello, I just got a lazerpoint 24" cutter with the t-shirt thermal press kit. The software i have is Adobe suite CS3 CorelDraw X3 Inkscape Sign Cut Pro New to this stuff still learning how to do a lot of this Converting. So i can cut it out. I run an airsoft business and this is a great second income for the company. But so far it has made good money as it was mainly for just a secondary income. It has proven to be just as good as our airsoft. It has been only 4 weeks of use. It is great to see how everyone is so helpful. i hope i can put in just as much, once I get good at all of this. THXS, Nick aka Soul Reaper Adrenaline Junkies Airsoft Lakewood,wa 253-503-0562

What vinyl did you use? Nick