RocketRollinSX
-
Content Count
38 -
Joined
-
Last visited
Posts posted by RocketRollinSX
-
-
I am putting together some shirt designs for our maple sugar house. Im looking for a vector of a maple tap in a tree or anything along those lines. Anyone have anything like that? Thanks!
-
I had called them last week. They set my COM1 setting to Hardware Flow Control in my device manager and in the SB software. Oddly enough it wouldn't cut at all after that. Tonight I set the PC to no flow control and SB to Hardware and it cut everything no problem.
- 1
-
I will have to try disconnecting them. Its odd because it will cut smaller decals no problem, but I've got a sign job I'm working on and it dies part way through every time. The only difference is there is more text to cut.
I remember a thread way back regarding cuts that are to long but I cant seem to find it.
-
Ive had my Pcut 630 for about 5 years now, never had an issue. Today all of a sudden at the same point in a graphic ive cut many time it stops part way through. It appears that the cutter is rebooting itself because it stops in place, then goes to the online screen. Any ideas? Cutting with Win XP, Serial cable, using SignBlazer.
-
I have a roll. It works good for sandlasting...but I wish it was a lot tackier. Unless its a perfectly smooth surface it does not stick all that well.
-
Nice, thanks for the replies. I ended up ordering a roll of the USCutter sandblast film to try. I will still try layering up in case I am ever in a pinch again.
-
Anyone have an adirondack chair on hand?
-
Has anyone tried cutting through more than one layer of vinyl at a time? Typically I use Oracal 651 for my sandblast resist when blasting glass. I want to blast some slate witha heavier grit and would like a thicker stencil. I was thinking about layering 2-3 layers of 651, then cutting it which would give me a thicker stencil. I have a USCutter 24" PCUT. Would slowing the cut down and adding some pressure be ok?
-
Thanks for everyones help. Im pretty sure I figured it out. I imported it into SB and did a total weld and that seemed to do the trick. I just need to clean up the tips of the flake and I should be good. Thanks again to everyone who chimed in on this thread!!
-
Im gonna have to try to redo my AI file. I really need the lines to be perfect for this. Tracing seems to make them all rounded when I need crisp.
-
Try now.
-
This is what I have. Couldnt attach file is to big. I need to somehow group all the parts together I think. http://www.hillsidefamilyriders.com/Josh/Snowflake.ai The people want this flake as it matches all their invitations etc.
-
Does anyone have this snowflake on hand already? I tried to draw it but when I import the EPS the image skews and I cant seem to figure out why. Got a 40 mug/glass etching job to do with it. Thanks!!!
-
I am trying to recreate this "BR" for a project I have going. Is there a font that is close to it or can someone assist in vectorizing just the "BR"
- 1
-
Had this company send me this logo to cut from vinyl and put on a 12x18 reflective backer for some trail sponsorship signs. This would be a nightmare to cut and try to make work. Is anyone able to print this or give me an idea what it would cost to print this? Id lke to just just take the print and stick it on the backer. Probably looking to print it 9" tall by whatever it falls widthwise.
Thanks
-
My though was if I used reflective background I would get the best bang for my buck but not have much if any waste from weeding. As long as the non reflective lettering shows up im happy with that.
Does anyone have a reflective recommendation? I was looking at the Oralite 5500
-
I have a job to do some reflective snowmobile trail signs. What would be best....solid reflective background with non reflective lettering? Or Non reflective background with reflective lettering? Ive seen it done both ways.
-
I was able to find it after some more searching. Thanks.
-
-
-
Does anyone have any sort of decal showing there is a security system installed? Had a friend partially get broken into. Kinda like the "This home is secured by: ADT" or something like that. Thanks!
-
Everything you see is etched. There is no stickers. I guess if I had to charge something like 8 bucks each for the glasses and 30 bucks for the bottle or more. I did this for a gift for my friends wedding. His wife loved it.
-
-
Thanks for the tips. I'll stick to some non carbonated wine just to be on the safe side. Sounds like a good episode idea for Mythbusters.
Inverted Round Corners
in SignBlazer
Posted
I am trying to create a border with rounded corners. But I want the radius to be inverted vs the standard rounded corner. Does anyone know how to do this in SignBlazer?