javierespada

http://www.seeklogo.com/cat-in-the-hat-logo-27094.html

This is what I came up with hehehe Might work, you never know! Hope it does! They can be realigned so that it doesn't form a pattern and then rotated 45 degrees and cut into a square so it looks kinda like the ones you had, if it does I will upload the eps

do you need it to be exactly like that or something similar? if something similar works then it would be easy to make but if you need that to be an exact copy it would take a lot of time to find all the exact guns and put them in that same order hehehehe, I could send you a .zip file with tons of weapons, just turn them 45

Yup, the angle doesn't help to get it right, need to take it flat at 90

Here's the sun to be cut on a single color, don't know if this works, if it does I could finish the rays. sublime sun single color.eps sublime sun single color.eps

Here's the grass, the text, I couldn't find that font in the ones I have installed. Hope it works Logans.eps Logans.eps

Look up how to do multilayer on the etching and the rectangles on the bottom can give to it a nice depth, it is actually simple, make sure to just cut the letters and cover the area you want to do the rectangles, once you are done with the letters, remove the vinyl or mask and do the rectangles, it will give it a nicer look, practice makes perfect, so practice on a separate piece of glass until you get the result you want, all it takes is one or two times to get it right and get the hang of it.

with photoresist and a fine grit it can easily be done... now, if you are cutting vinyl and weeding... good luck! To get this it must be a size you are comfortable weeding, don't get the gun too close, always keep it at 90

any bird in specific? I have tons of aircrafts. For printing or cutting?

I didn't like the hair much, so without the white stuff might look better, it was just a quick try to get it into cuttable graphic

Sorry I didn't see it earlier :'( This is what I came up with hehehe hope it works for next year! jigsaw mask.eps jigsaw mask.eps

Here's the "W" logo on the gun autococker w.eps autococker w.eps

Just in case! wgp paintball.eps wgp paintball.eps

Les Paul lespaulcomplete.eps lespaulcomplete.eps

Gibson Flying V gibson flying v.eps gibson flying v.eps

This were done by me the other night for a request, enjoy! BC Rich Warlock.eps BC Rich Warlock.eps

BC Rich Warlock BC Rich Warlock.eps BC Rich Warlock.eps

Gibson Flying V This time I included all the hardware Enjoy! gibson flying v.eps gibson flying v.eps

Just in case, the easiest of all, the blank design lespaulblank.eps lespaulblank.eps

A third and final attempt with pickguard! Now you might get me started doing a few more, Ibanez, Fender Strat, BC Rich Warlock and possibly a Randy Rhodes flying V but not tonight! And most likely without all the details, just a blank guitar body hehehehe lespaulcomplete.eps lespaulcomplete.eps

Updated version with inlays on it lespaulinlays.eps lespaulinlays.eps

Here is what I made tonight, hope it works! lespaul.eps lespaul.eps

When importing to corel a lot of times you will need to ungroup or ungroup all items in order to edit them, that brings another issue, sometimes when you do that the whole image will become black leaving you clueless, what you can do is view as wireframe or right click on a color to make a hairline border in the image and move objects back and forth to weld or intersect or simplify. Hope it helps in the future!