freebird1963

are the drop boxes still up ? just signed up under one of them. It is kind of confusing. how do i get to the files if still up ? I have a bunch of ai files to put up but they are compressed. Thanks M

Looking to get a second blade holder. Is there anywere else to get them. 30.00 bucks seems a whole lot to much for it.

Okay I have never been able to get SB to work off my LPT1 port. I run signgo and works fine off LPT1 so its not a computer issue. Looking at the Signblazer cutter setup it doesn't appear to even see the port properly. I have attached two captures of the ports in SB. It shows my CUT-3000 and it shows our brother all in one on another computer but not LPT1 and does not have anyting listed for BLAZER LPT1 either. SO is there a print driver for the MH-721 for signblazer ? Thanks Mark

does that include the MH -721 ? Cuz thats what i run

Dude That is the worst advice ever given. There is no exception in the copyright law that says you can make for your own use. Copyright is copyright.

Dang. Wife wins. Thanks

Looks more like a dowel or some plastic thing than ribbon but since I ain't sure can't argue. Ribbon silconed to the back of the tiles ? Thanks

which would be the one they provide since I think most have the original blade holder.

Back on topic. Is the blade holder diameter 11.5mm like i see many of them ? I couldn't find the specs. A off the topic. LCD is 30 and a blade holder is 30 ? Come on. Hell the motherboard is 80 so the plastic blade is just under 1/2 the cost of the main componnent. ? All of it is chineese made not USA union. Thanks Mark

I got a bunch of files that are AI compressed files and I can not open them. I use corel x4 and won't open them. Anyone want to export them to eps ? More than welcome to keep the ai files. One compressed set is barbie files. The other is a hodge podge of different things. Thanks M

Gee never thought of that. duh Anything specific the holder needs to have or be. ?

Thanks. Gonna give it a go.

Very nice. I have been trying to think of something for my dad and stepmom for Christmas. Last year it was a big blanket family tree. this looks cool. What did you use to hold the long tiles wiht ? Thanks Mark

Hey deth502, Great idea. I had mine vertical but its a small room in the house and tired of dodging it and 'fraid I'm gonna put a eye out. How far apart did you put each rod in a row ? Thanks Mark

Every now and then the cutter makes jagged lines when doing diagonal lines. I use signgo and thought maybe software. So trying out the signcut productivity pro and still get them. Looking at wireframe mode of the desing shows straight lines. Any ideas ? Thanks Mark

I am test driving the scp with a refine mh 721. Are the instructions in the paco manual still the same ? I see in these posts the laserpoint one is the only cutter mentioned. Thanks Mark

Sorry not able to get them. Already closed her up and got it running. Maybe wishful hoping but seems to cut better. One design that would be a bitch to weed cuz the cuts weren't closed and all was weedable now. Hope so. Mark

I tried tin eye but it could not find one. Its some medical thing. I know what it is but can't think of it. scarpolgieous or some dang awful thing to remember how to spell. Ones I found don't come close tho. Thanks Mark

Thanks but not it. I have to match the one I posted unfortunatley. But I appreciate it. I am going to keep tihs one. Had a sofball team that used this for one of their sponsors. Thanks again M

well I got it installed. It was a bitch tho. Underneath the MH-721 are two metal covers. One big one, one little one. You take off the little one and the two feet on that side. The feet have screws inside them. Mine was liked glued on or something and had to kinda pry it off. Once the cover was loose the motherboard is there. The cables going to mine were short and I could barely get to the board. and the power cords were wire tied to a hole inside there to the frame. WHAT A DUMBASS THING TO DO. Plus the board is kinda flimsly. Def not a high quaility built motherboard. Felt like two layers pcb board. Anyways I was able to get some of the cables a little looser. The siliconed all the power adapters and cables so making it harder to pull them off. And the board being flimsy bends like a crazy. I never could get the power adapters off which would have made installation so much easier. My 1meg memory chip was suppose to say wingsshaw or something like that. But did not. Tech guy was perplexed on to why the chip didn't match. Getting the chip off was pretty easy. I had to manuever the board to get a screwdriver (flathead) under to force it up. The new chip had some bent prongs. That sucked. It probably took 15 mins plus to get the new chip on. I had to take it up several times to straighten prongs. Eventually got it tho. If I could have gotten to the board easier it would have made the job so much simplier and less stressful. Put it back together and held my breathe and turned it back on and it came on. WHEW.

Found what its called. Chiropractic Caduceus But the ones I see online are not good resolution. If anyone would have a vector one that be so cool. Gonna try to vectorize one but so far not good results. Thanks Mark

Toolman I just got my memory upg for the MH-721. No install help from uscutter tho. What bottom cover did you remove the large one or small one or both ? Did you take the 4 screws out in the middle of the large cover ? How did you get it off. If thats the right bottom cover how did you get it off. Mine doesn't seem to want to come off. Did you have to take the feet off too ? Thanks Mark

Hey Rox Does the GCC close cut paths good. That is one complaint i have with this dang mh 721 is it seems to not close cuts very well. Is it good at cutting good detail and small letters ? Thanks Mark

Has anyone tried cutting Imprintable Warehouse SPECTRA FOIL ? I have a MH-721 with CLEAN CUT BLADES and can not seem to do more than scratch it. I was at 420 force too ! Yea I am cutting on the right side of the vinly too. I can feel the lines but doesn't weed at all. I can't see any lines either. I put the crappy BGS vinly back on to make sure there wasn't any issues with the cutter and cut right thru it cuz I forgot to change the force. Thanks Mark

Thanks. thats what I think but can't get it cut. How do you like the GCC Expert 24 ? It doesn't have contour cutting ability does it ? I think I am gonna start looking for a new cutter. Thanks Mark