J3werks
Members-
Content Count
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by J3werks
-
I had a peice of plexiglass I use for my cutting tabel and I put these underneath. They seem to be brigh enough, and you can get more LEDs for about $6, this one is just $16 cause of the power source http://www.amazon.com/HiMart-White-Strip-Supply-Adapter/dp/B00II1MN5I/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1414812038&sr=1-1-catcorr&keywords=HiMart+3528+White+LED+Strip+light+with+Power+Supply+Adapter and they are adhesive backed so you can stick them anywhere
-
These are the two cars I did so far this is, the other is the racecar I work that we do all are own vinyl on. I did a Jr. Dragster with chrome vinyl having a ripped design down the whole side of the car, I wish I had pictures of it but i have one more for the customer I had to do. When I was doing the install on the #25 car the customer did not want the final white layer on the door numbers like I did on the roof. The #18 I used some of the large red mirror lens from SW I paid $12 for on clearence! All in all the more jobs I do the easier it gets each time!
-
Sprint Car Pricing
J3werks replied to ozzydrow's topic in Business Practices, Sales and Pricing, etc.
You really dont need to use anything like a cast. On our sprint cars we use Oracal 651, and it held up to 20+ races last year and it was pressure washed every week. At the end of the year the vinyl still looked new. Also another thing to think about is you dont want to be too high on price because with a sprint car they might go through a wing or two a year. What you have to consider with a design is not to have too many sharp points because that is where it usually starts to lift. And Vinylmotivations, Oracal 651 will be just fine for the speeds. Our sprint car turns about 120mph average, and we have used 651 on our ARCA car when we went to daytona, so it will hold up to 170+mph, just all depends on how it was installed. For the price id be at $400(I am usually on the lower side for pricing), but the install can be a pain in the but with all the rivets on the wings and the compound curve on the tail, So your atleast in the ball bark, and not way too high. ToddHoddick.com -
Thanks For the help. I was trying to mess around with the communication setting on the plotter and in the computer, I had them all set the same, but the last letter to show up for the setting on the plotter was a P, which I am assuming means it is trying to read from the parallel port, and it had no S option(serial if my logic is correct?). I am going to try and find a USB to Parallel cord within the next week. BTW this plotter has no USB port on it, although it has a hole with a cover over it where they are on the newer ones.
-
I recently acquired a GCC Jaguar JR -61. I have no manuals or anything with, I know the test cut works, and I found the drivers in Flexi, but It just wont cut. When I send a Job to the plotter, it takes a few minutes and then it gives me a write port error, what does that even mean? Any advice would be helpful at this point. Thanks, Jim Jones III
-
I run Flexi 8.1 off my year old laptop, only a 32 bit OS, 3.25GB ram, and a 2.2GHz dual core Intel processor. The only time it seems to slow down is when I am working with large files in Photoshop CS4 and Flexi at the same time.
-
Put them on the valve covers. Many of the motor builders in my area put them on the valve covers and have no problems with the heat.
-
Same thing just happened to me, SW sent me a 24 x 50 yd of 651 black when I ordered white. Im Just going to call them and see if they can just swap it out for me.
-
When I need sharp corners I use the drop shadow option, but set the offset dimensions to .001 for the up and down. Then just put the last dimension box value to the outline size you want.
-
Just ordered my Epson WF 1100, and going to buy some material. I was wondering if anyone use the lexjet Glossy Vinyl with PSA (http://www.lexjet.com/p-2224-LexJet-Glossy-Vinyl-with-PSA.aspx#Overview) or should i just buy the Sihl 3988 Classic matte? Which do you use with your WF 1100? Thanks, Jim Jones
-
So ive been doing a lot of research on the Epson Workforce 1100 printer, and im 90% positive I am going to buy one from cobra. I have just a few questions regarding the drivers and setting for it. The people using this printer with flexi, are you using it with just the standard print option (Not the RIP and Print for larger/high end printer)? If you are using the RIP and Print, what drivers are you using for it, because I assume if you print this way then you can contour cut with a cutter, where as the other way I am guessing you cannot? Also I see the max print size is 13" x 17", but I remember hearing of others printing upwards of 13" x 30". If you are using the normal print option, what setting do you use for the vinyl material (Sihl 3988) Any response will be greatly appreciated. Also, does anyone know if there is a transparent vinyl that works with this printer? Thank you Jim Jones III, J3werks Custom Graphics and Vinyl
-
Where do you buy your striping tape from? I have a racecar to do, and i need striping tape for certain areas of it. I know Universal Products makes it, but i cannot find anyone who sells it. Well SignWarehouse does, but only black, Im looking for colored striping tape, like white, red, orange,a green, in various widths
-
Where's the link? And do you have the product / series number?
-
So I do mostly racecars, and I picked a customer who buys all his own paint film, and wraps the hoods and roofs instead of painting them. The problem i run into is getting the vinyl to sick to the underside of the hood after I wrap it. The bottom of the hoods are just plain fiber glass, and the vinyl does not want to stick at all. Any tips of ideas that would get it to stick would be greatly appreciated.
-
I cleaned it with alcohol, but i guess that night not be abrasive enough? Someone also told me to try 3m primer, and just prime it before i start.
-
T square, line everything up on the edge of the table. And a good sharp razor blade
-
Are there Drivers for Flexi (Pro 8.1) so you can print with the registration marks and then contour cut?(cannot find them in the list) Sorry if these questions have been answered. Been thinking of buying one so i can do smaller printed stickers for myself.
-
Tried what the font and received no results for either.. The First 3 are part of "Kennedy's Cove" And the last one is a name for a racecar driver.
-
Nice job. I do mostly racecars and i was wondering how you got the outline between the black out line and the black graphics? Did you just do another white outline or break the path of the stipes? Seen that a few other places and wanted to know how to do it.
-
I need business cards made!
J3werks replied to NukleoN's topic in Business Practices, Sales and Pricing, etc.
Stormy, are those 2 sided cars UV coated (high gloss) on both sides too for that price? -
Nice work, GO BURLEY, i usually watch him race on a weekly basis
-
Between school, drivers ed, and everything else, in the past few weeks this is what I have done (with the help of my Dad).
-
Thank you all, couldn't do some of it if it wasn't for this forum here... THANK YOU ALL!!!
-
My first customer that came back to get door magnets and his bounce house trailer lettered. Also a drum Head I did for a friend and his band.( I did all of this while maintaining a 98.96 overall average in school!)