etchworks
-
Content Count
79 -
Joined
-
Last visited
Posts posted by etchworks
-
-
DrVolt,
I have called them they don't have any and aren't getting any, anytime soon, I was looking for another option.
-
I have a laserpoint 48" cutter and I need a new cutting strip. Does anyone know where I can aquire one? Thanks.
-
Volt, I'm pretty sure it's cutting them one at a time...did the dryer sheet trick.and thigs were working finr then all of a sudden the cuts started being weird.
Skeeter, Yes the packet size has alweays been at 1000. curve quality is set at high but it has been working fine and I am only cutting one image at a time not all at once. i cut an image then shut the cutter off and unplug it to make sure I dissipate the static. Like I said it's been working fine then all of a sudden it's cutting the insides of some of the letters out of shape........
-
Ok I have a laserpoint 48. Flexi 8.6 starter. I have to cut 40 of the same 11.8 inch by 13.9 inch design with heat transfer vinyl....I'm about halfway done cutting them and all of a sudden the letters are not cutting the correct shape. for instance a "P" the inside of the letter will not cut the correct clean shape it's a little distorted.....any ideas why this might be happening?? thanks in advance for any help anyone can give me....it's frustrating.
-
I suggest doing a search for basketball vectors and see what you can work with and go from there, that's what everyone else does. Or learn how to re-draw objects. Also, thanking people when they help you is just plain old common courtesy.
-
Try brands of the world or a google search
-
Nice job Mike, how do you like the Imagaro compared to vector magic or other programs?
-
What the hockey chick said.
-
I am looking for Eugene the magical jeep in EPS format if anyone has it, thank you.
-
Joe, I have that one but I do appreciate the effort, thank you.
-
probably have to re-draw
-
Hey anyone have a woodie in eps ? Any help appreciated, thanks.
-
Thanks alot
-
Thanks Jen
-
Thank you !!
-
Bayshore, thanks man I have been lookin for an EPS file of my 3 step kids.
-
Good luck with the show, let us know how you do.
-
-
Ah, nice graphic.......... dodge ram with flaming snot......thanks for the post.
-
Hey thanks xtreme
-
I think I have it I'll check later and let ya know.
-
Thanks alot Mark....for some reason that "&" was kickin my ass and not vectorizing well for me at all. I appreciate the help.
-
-
Sorry about your friend, I looked and I don't have any trike artwork.
Laser Point 48" Cutting Strip
in LaserPoint Cutting Plotter Support Requests
Posted
Thanks for the help guys, I will try JSI