Thanks Paco, I have tried to move my X-Y adjustments and it doesn't seem to affect it. I guess I'm not 100% as to what I'm doing. I assume the X adjustment handles the horizontal cuts and the Y does the vertical. But by changing the X_scale, will it move the top line cut to the right more to match the bottom line cut or vise-verse? Also, why would the Left vertical line cut fine but the right side cuts down 90% then cuts in to the Bottom line on an angle? The manual is pretty vague about these settings. I thought it could be a software settings problem, but running the test cut without software running leaves me to believe it is a "mechanical" setting within the machine. If you or someone could explain the X_scale adjustment and Y_scale adjustment function. IE Does it lengthen the top line and shorten the bottom at the same time or vise-verse and shorten the Left vertical and lengthen the Right Vertical. Hope some of this makes sense and I appreciate the help. Thank you.
Brian