1leonchen

A3/A4 PAPER CUTTERS i need some more info on this product. i want to use it to cut business cards and flyers. us cutters has one listed but i cant find any info.

usb connection or parell conection dosent work

com port 2 data bits 8 parity none buad rate 9600 flow control hardware hardwires dtr rts cts windows and flexi have the same settings plotter has 9600 baud rate set

i am getting the plotter cut from sign blazer, but it wont cut from flexi. i have tried the roland pnc 1000 driver and the driver pack from your site none works. i keep gettting write port error . i have check the buad rate the com port number and still nothing. flexi work it runs a mutoh falcon 48 outdoor so i know flexi works. i just cant get flexi to comunicate with the plotter.

I GOT MY CUTTER WORKING UNDER THE SIGN BLAZER DEMO. BUT I NEED TO GET IT TO FLEXI . WHAT ARE THE PROCDURES TO DO THIS MY PLOTTER IS MH-721. PLEASE FOR ANY ADVISE THANKS. ALSO IF SOME ONE COULD TELL ME HOW TO GETA HOLD OF THE ORIGINAL DRIVER CD PLEASE AND THANKS

i bought a cutter from someone who bougt it from uscutters. the person cant find any of the cds but the driver cd . i iseem to cant find the drivers for the plotter. its a 24 inch. i can find a serial number or model number. but he says it woks on graphtec drivers. i cant get any drivers off the cd to work. and i cant get any windows drivers to work. i reach to a point where windows asking me for a gpgl file. i cant seem to find it. i am in a jam. work is pilling up bythe day.help i am going crazy. if i cant get it to work. the plotter test ok its just the stupid driver wont work. i am not new to the sign business. i and i am not a stupid at computers. diaganosis usb dosent work, parell dosent work and i cahnged sreial cards. tested it on a pentium 3, core duo, core 2 quad and a amd dual core 64. flexi cant comunicate beacuse the computer has to reconize the plotter as a printer. the onlything i know is that ths plotter uses a graphtec driver. so help please!!!!!!!!!!!!!!!!!!!!!!!!