ainakeaboy
-
Content Count
64 -
Joined
-
Last visited
Posts posted by ainakeaboy
-
-
Bought a usb to serial cable from radio shack and there hasnt been a problem since i switched . The answer is SWITCH TO SERIAL .
-
Im Having same probs , sending output to cutter and freezes ? Im using a usb connection . Is there a serial to usb ? I have a serial connection in the back of my laptop but its a female piece and the cutter is a female piece ? Any toughts ?
-
Thanks for all the info . Does anyone one know what material they use to print the posters you buy in the stores ? Im thinking about the epson 7600 24" printer to do posters and stuff hopefully this deal comes true !
-
Are you looking to print one or two at a time? One at a time, low qty
Are you looking for archival or short-term? The cheapest way
What substrates do you think you'll need to print on? Poster paper/vinyl/banner
What kind of coverage are you expecting to lay down? 24"
Photos? Text? Both
-
Hey y'all , i wanted to get into printing posters and was wondering if anyone has experience In this ? Is a epson 7600 good to print posters ? What software do you have to use ? What material to print on ? Qny hel would be appreciated . Thanks
-
So i times the original image size by 20 to get real life size ? I want to use the templates to do custom graphics for specific cars . Is this possible ?
-
I just got a 4 disc set of all kinds of Car,boats,atv,big rigs and motorcycles templates for cheap . Now my question is what are these used for ? How do i make them full size in signblazer ?It says 1/20 scale , so do i times the size by 20 to get full scale ? I attached a sample of what is on the disc, i deleted some of the stuff on there to make it small enough ,Hopefully somone knows how to actually put them to use .
-
I was actually looking for a "lazy mans way" of doing it . I guess there is no way around doing it node by node by node by node ........ well off i go to do a custom order i have . Will post pics of finished product.
-
Well it would be great if it can be done in SB but i just wanted to know the general idea behind doing it on any software . I just try to vectorize in SB but it doesnt come out very good . So any help on how to do it on any programs would be appreciated. Thanks
-
Did a search but couldnt find topics on how to make a silhouette of somebodys picture not just an outline . Anyone has experience in doing this ?thanks
-
Look on the left hand side , how many colors are there ?
-
Does any one use the vinyl roll holders that come with uscutter vinyl cutters ? I have them but dont know how to use them so the vinyl dont spool off the rolls . There is a rubber gasket that came with the holders but i dont know where they go ? Help !
-
Thanks , Got the file to open now . Now i can actually use the disc i bought !!Export as an eps file.
-
Ok so I am using corel 9 and when i try to save it doesnt allow me to save as an eps file only other types ? Am i doing something wrong ?either Corel or Illy and save it as a version 8 .eps, then import into Sign Blazer, You have to remember Sign Blazer has not been updated for a few years.
-
So the only way to open it in SB is to open it in corel then save as an eps , then open it in SB ?Try this, hope it helps.
I opened the file in Corel, and saved it as an eps and it worked.
Rod
-
Hey , I just got a cd with sports vectors and i cant seem to open them in signblazer ... I try opening them both ways but the download bar moves then it goes back to a blank page ? Please can someone try to get this to open in signblazer ?
-
Looks good ! What would be a good embroidery machine to get your feet wet ?
-
Yah, I'm impatient I guess lolwow look at you go - finding the answers before anyone post!
-
Did research on my own again . To make jogging in smaller increments you have to press 5 to toggle it on and off. Contour cutting here I come lol .
-
Did research on my own and found out the problem . Cut/mask prob and fixed it and did a contour cut yippie . Now another prob , when i load the paper i line it up with the first laser , but when i jog it to the left it doesnt jog on to the left reg mark in the middle , Like its off a little so when i cut the cut is off a little. Is there a jog button that moves only a little ? How do i fix this ? THanks
-
Hey got it going but one problem , cant seem to line up the second reg mark . When jog it to the left it jogs to much so i cant hit the middle precisely . Any ideas ?
-
Hey , Just received my lp 24" . Did all the steps to countour cut , vectorizing ,outlining etc. got to the part where you have to line up the laser . Locked in the right side , jogged to the left side locked that in ,cutter head went back to the right registration mark press cut and nothing happens ? Any ideas what im doing wrong ?
-
Great vid . Too bad no sound instructions though
one question ,Does it automatically print out those registration marks for you ? -
Yeah I'm in VegasThats pretty reasonable. Where are you located?
I just bought rolands Egx 20
in Engravers
Posted
Hey everyone , i just bought a egx 20 and wanted to know if anyone else has one of these machines ? Im new to engraving and bought this hoping to do custom dog tags and stuff , will this machine be suitable ? Any info or help will be appreciated . Thanks