SandyM114
Members-
Content Count
887 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by SandyM114
-
I get 18.00 per tile at craft shows. The only down side to selling tiles is if I have to mail them, it's about 7.00 per tile to mail. I buy pizza boxes from a local pizza place for 50 cents to ship in. Perfect size for a 13 X 13 tile. I try to take my small cutter(12 in.) and cut their names at the shows so I don't need to mail. I have 3-4 tiles made up with each letter in the alphabet Sandy
-
I downloaded the signblazer nag screen patch but none of the uscutter machines are showing up. I have a mh360. Does anyone know which cutter I can select to make it work?
-
Signblazer nap patch doesn't show any uscutter machines
SandyM114 replied to SandyM114's topic in SignBlazer
Someone was selling it on here for $5. It was supposed to have all the cutters listed but it doesn't. The person was selling it to help him pay his bandwidth to allow to share the patch -
Signblazer nap patch doesn't show any uscutter machines
SandyM114 replied to SandyM114's topic in SignBlazer
Sorry mh365 -
I can't help you with the Corel but I have to say when you buy it, you get no manual at all. I'm in the same boat as you. About all I've been able to use it for so far is to open some files that signblazer can't open.Sandy
-
Well, yes, I know it's not just clip art, but it's definitely not digitized which is what I need. I paid someone to digitize it, just haven't stitched it out. Thanks for the website for digitizing...I'll check that out.Sandy
-
That's just clipart, right? I have that, but need it digitized for stitching. Thanks though.Sandy
-
I don't use inkscape , just Signblazer.
-
Uh-oh....forgot the important step.....After placing all my circles I copied, I punch them through the letters (using the weld).Sandy
-
Sharon, I'm definitely not really knowledgable, but I have done several rhinestone templates...I type in my wording, click on the draw circle tool, size it to the size I need( I'm using 4mm rhinestones, so I cut the circles 4.2mm) I don't set any overcut like some do, mine works fine without doing that step. Then I mirror image the entire design and send to the cutter. I hope I've explained it good enough to help you.Sandy
-
small problem with cutter
SandyM114 replied to SandyM114's topic in USCutter Refine Cutting Plotter Support Requests
I'm not sure it was over the center piece, but it was within an inch if not...I'll try cutting again tomorrow and see if that is the problem. Thanks for the quick reply, I hope that is the problem. I know it's never caused a problem before then all of a sudden it is bunching up the vinyl.Sandy -
small problem with cutter
SandyM114 posted a topic in USCutter Refine Cutting Plotter Support Requests
For the past week the tracking wheel on the left side of my MH871 can't seem to hold the vinyl when the blade cuts near it. It wants to wad up the vinyl on the far left side every time the blade cuts near that edge. Does this mean it's time to change the blade, maybe? I've tightened the wheel a lot and it still does it in that one spot. I have to sit right with the cutter and hold the vinyl down when the blade cuts in that area.Bummer! Any idea what I can try?Sandy -
First of many questions!! Help!
SandyM114 replied to Debra Payne's topic in LaserPoint Cutting Plotter Discussion
I line up my vinyl about 5 inches from the reset button to start my cuts. It's never bumped into the reset button. It seems to give it plenty of room.Sandy -
IT WASN'T ME!!!!!! LOL While we're on that subject, can I get the files again, or is everyone still pissed at me? Sandy
-
trying to refill my epson cartridges....
SandyM114 replied to SandyM114's topic in T-Shirts and/ or Garments
I tried not to call Richard with this, just wanted to find a quick answer on the forums. I broke down and called and he worked me through it. All is well! For some reason, the ink light wouldn't light up so I could do the refilling. Sandy -
I've got the epson 1100 with cis system inks, but my computer gives a message that ink is low and the page print is very light. I read the little manual that came with the printer, but it says to push the ink button on the printer console and it will light up so you can do the maintenance. My light doesn't come on. Any idea what I'm doing wrong? Thanks for the help! Sandy
-
Strange Cutting MH871
SandyM114 replied to bayotle's topic in USCutter Refine Cutting Plotter Support Requests
I upgraded the memory in my 871.Sandy -
Well, I was mortified about what I did! I knew after I moved the folder to the desktop something still wasn't right about the new folder I made so moved the original back inside the dropbox file. I didn't have any idea I was deleting anyone's files. I just happened to see your note about it late yesterday afternoon.Sandy
-
Geez! I'm Sandy, and I sure didn't know I did that. I saw a message that my dropbox was almost full. I dragged the folder called vinyl works off my desktop dropbox file and tried to move those files to a new folder thinking that was the thing to do. I didn't know it affected anyone else's. I assure you I was not trying to ruin everything for everyone else. You'll have to have me flogged! I AM GUILTY OF IT ALL. All I can do is plead ignorance. I've never used anything like dropbox. Sandy Morgan
-
Holloway
-
Thanks for the steps! I'll have to type them out and give it a try.Sandy
-
I'm using sign blazer, so maybe can't do it.Sandy
-
your signs look great! How are you able to get the black outline to go around the entire word, rather than around each separate letter? I've been trying to get that done.....Sandy
-
I signed up and received an email from jmatson. I went to the dropbox site and signed in. I looked at the files, some anyway, but now how do I use one? Thanks.Sandy
-
My neice asked me to do this scripture and wall art for her new baby. Joe vectorized all the wall art for me, and my neice installed. I think it turned out nice. She hasn't finished putting up the rest of the wall art, but I'll post pics when she finishes them.Sandy