2GuysSign

Members
 View Profile  See their activity

  • Content Count

    432

  • Joined

  • Last visited

  • Days Won

    2

Posts posted by 2GuysSign

  1. Posted

    Usually i get some bubbles in my Oracal and about a week in 70+ Degree Weather with constant sun, they go away...  if not just use a fine point needle and just poke so the liquid or air comes out.  the hole will disappear in time!

  2. Posted

    Here is a banner that we donated to Seneca High School for their Deca Fashion Show!  This is a big thing for all deca programs, as most of you know and Seneca High School needed a banner to advertise for theirs.  We donated the banner for advertising rights during their show! I did the banner cheap and used Shine Rite Vinyl from Fellers...  My opinion on the vinyl is little hard to weed, need more pressure then Oracal, but for a cheap vinyl, it has a better shine then oracal 651 and lasts the same!  Here is both the Preview and the finished product!

    post-3781-12986531202841_thumb.jpg

    post-3781-12986531203195_thumb.jpg

    post-3781-12986531206702_thumb.jpg

    post-3781-129865312069_thumb.jpg

  3. Posted

    I am looking into a used 55gal starter fish tank...  I want this to be the start of my fish experiences...  I have been looking up some of the fish i want in the tank, two of which are a Clown Knife and a Silver Arowana...  These two fish are what i've always wanted.  I know im gonna need a 10gal feeder fish tank, which i have.  I know the Arowana can grow to 22" and i've seen a Big clown knife. 

    Here are some videos of the large Arowana and Clown Knife!

    22" Silver Arowana Feeding

    http://uk.youtube.com/watch?v=5gQiRdh9Sac&feature=PlayList&p=22BEDCE778352A00&playnext=1&index=2

    Silver Arowana

    http://uk.youtube.com/watch?v=x5da2OySfew

    Clown Knife Feeding on Gold Fish

    http://uk.youtube.com/watch?v=hSdTxdruWtU

    Clown Knife as big as a CAT!

    http://uk.youtube.com/watch?v=u1wE93cA8uA

    There was a vid of a Silver Arowana Feeding on a baby duckling, but that was a little to much for me...

  21. Posted

    Pressure pots are more efficient than siphon. However, I suggest a foot pedal control with the pressure pots. If you are just starting, I suggest a cabinet with siphon and a decent regulator. Look at Harbor Freight Tools online or store. You could check TP Tools.com too. If you're not blasting big stuff, a blasting cabinet is just find. I even deep carve with my siphon blasting cabinet using 40 to 50 psi. My compressor comes from Harbor Freight Tools...5hp, 25.4 cfms @ 40 psi and 18.5 cfms @ 90 psi. This is very important...cubic feet per minutes...at least 12 to 14 cfms! Use Aluminum Oxide if possible, I use Garnet. It is clean and practically dustless. Also use a good ventilation system on the cabinet. A mini saw table vacuum will work around 100 to 150 dollars. Upgrade when your projects start making you money. This is the best way to cut corners or you will be out of tens of thousands of dollars. Always wear respirator. Don't cut corners here...go to Grainger Tools. Spend between 25 to 180 dollars, these are your lungs! Keep it blasting!

    Is it a 80gal campbell hausfield?  if it is, i have the same compressor!  i also have a small 20 gal craftsman that i use for blasting!