designed

If someone uses win sign can they open an eps file for me that another computer cannot seem to be able to do want to know if it is the computer or not. I have attached it but please let me know if you used winsign or not. Thank you. eps two sticks.eps eps two sticks.eps

Thank you very much!

Thank you for the info. I just saved it in illy 8.0 one being eps and the other just AI. I attached them both would you please see if you can open these in winsign. Thank you much! stick people eps illylevel2.eps stick people just illylevel2.ai stick people eps illylevel2.eps stick people just illylevel2.ai

How long have some of you been using your copam and is it on a regular basis. I have had mine for maybe 6, 7 months now and use it everyday quite a bit and have had no problems as of yet I hope to get a long time of course. Would like to hear from some of you copam users pro's and cons.

This is great using windows 7 64 bit version everything works easily as not expected. Loaded corel x4 right on no problems. I hooked up my laserpoint to it and was going to load the driver but when I turned windows on it said loading and now done on com 3 ready to use. Sure enough I went to cut and presto in cut with out doing anything other than plugging it in. Graphics are awsome it will be a big seller they did a good job with it. I have no doubt my copam will work by just plugging it in. Big big thumbs up to micro soft for this one I have been using it for almost two weeks now. 64bit and all not a glitch of a problem.

wait a minute BJ I want to see you ban everyone from charter ok ya your list would be real real big BJ if you did that Wow

gee I don't have to you already did. It don't please me to not get along with some people but you know when some people did not want to get along so I learn to let them be that way

I can assure you if I wanted back I could be back in 5 minutes

I have submitted tickets in the past that never get answered I have had a shipping question in the past on some vinyl never answered so I started buying at signwarehouse.com and have purchased about 1,000 worth of vinyl in the last 2 months there because I could not get help submitting a ticket. Also signwarehouse.com is quite a bit lower than uscutter now on their 24x50yrs rolls and when I ask they match shipping. Maybe uscutter will lower their prices but I would have get questions answered? I have called in the past to get a tracking number because my customer needed it fast and I am talked to meanly he says the tracking number real fast and then when I ask him to repeat it he gets angry and yet their system never sends me a tracking number I cannot buy here because of this. Most of the time I need stuff fast and it seems most stuff is dropped shipped which takes a long time to get it like 2weeks. I wished that I could have gotten response from them in fact I get none so what is one to do but buy else where. In the market for a new cutter but I will probably not get a question answered if I was to ask something.

CRD this is incorrect my copam can cut directly from corel I have to export as an auto cad file then import it and cut from the print.

I wish it was 239.99 when I bought it around 350.00. I may decide to buy a roland or graphtec in the near future like a year to three yrs from now but for right now I don't want to spend that much right now I am saving for my silverado duramax. I stay very busy doing this but I do this after work and on the weekends I will never make what I make as a union electrician I do this for a bit more money. If I where to buy a graphtec or roland I would do it in a 24" and a lesser one for the 48". So what I don't want to spend to much for the 48" because I don't use it to much I would invest in the better for the 24" because that is what I use everyday. I will sell the copam and laserpoint at that time which I do plan on doing. I will keep on doing this even down the road when I retire for a few extra dollars. So I don't want to spend over 1300.00 for the 48" I would like to spend less just depends. What ever I spend it will pay for its self pretty fast thanks for the heads up on the 64bit it don't support yet I read that about 2 months ago. Anyway I plan on buying a graphtec or a roland in the near future.

The only reason I will change to windows 7 is because of the 64 bit. My name board specs are here http://www.newegg.com/Product/Product.aspx?Item=N82E16813131300 not sure. I have windows 7 also on another computer. My windows xp runs faster than the 64bit windows 7 but with programs running 64 bit like my corel etc I think it should be able to take an advantage.

according to you I already did now your just all talk......... there are other user names to use any way mister. I will always speak my mind no need for you to EVER think different.

Fivestar, I am using the new DDR3 1600 by G.Skill right now their price is 89.00 I would need to match it. I am using windows XP and xp only can see 3gigs. I am waiting for windows 7 to come to the market by then the price will be lower and I would get it then. I think once the price comes down a bit more I will get it and have 4gigs but xp will only see the 3gigs but that is ok until windows 7 comes out. I notice it from time to time a lack of memory. 4gigs should be minimum now.

Maybe I will make that decision there banner not you!

Benr98, your right thank you well said. I cannot do internet orders anymore though and I am not here during the day to make phone orders. Reason is sometimes I have a customer that needs something and a color I don't have and I have ordered this from USC because they and myself is on the west coast and I can get it fast in fact faster than from signwarehouse because they are in texas and it takes 5 days from them and about 3 days from usc; but two out of my last two orders where drop shipped and I don't get it any sooner than 10 days later so their stock is low always. I need things from signwarehouse usc don't carry so I find myself paying for shipping two times? No I have to order from SW. I opened a ticket over a week ago here at uscutter about my copam I have not heard from them yet and I will not 99.9% sure. So I wanted to buy a 48" copam but and envestigating other things still because I cannot get my ticket answered for one. This person was angry when I called more than once so I don't like to call them unless I absolutely have to. I think I have learned that I want to buy a cutter that I can buy parts for in more than one place. That leads me to say what about the copam I take it we can only get parts from usc huh? See there I go again they have driven me away so unless I really need to I don't bother. But I like you saying well put.

I thought forums where for learning?

ooo ok well now that you spoke for them we know nothing will change... OK WELL SAID ya right. I get things cheaper over there ok your right no change here you spoke for them and now everyone can see that there is no hope for change here.

well I can say your a moderator so only one side is expected how can a moderator have much weight to what they say when we all know what your going to say before you say itand I SURE AM GLAD THEY TREAT ME BETTER THAN THEY DID YOU ALL that had problems. What you have to say cannot in anyway change my good experience with them or others. Like I said glad they treat me better than you.. At least when I call and talk with them I feel I am talking to real people where as here I feel I am walking on ice waiting for them to get a fast attitude. Like I said glad they treat me better than they did you. Your a moderator that means your one sided or they will not let you......hmmm ok.

Not sure what your talking about pleasant people no attatude, best prices, they have everything in stock, they tell me to contact them before I buy here or anywhere because they will beat all prices for me. Also plenty of people to help much more stock and products. I am not sure that what you are saying aligns with this and my experience.

WOW well put protec I have recently left because of this and they get mad when I call asking for a tracking number. I went to signwarehouse.com and I asked them to match these prices they did and gave me free shipping and told me before I buy from uscutter contact them so when I contact them they have always beat these prices and either matched shipping or gave it to me for 9.99. They since lowered all their prices at signwarehouse.com I think they are trying to get customers to come they have everything in stock always also. uscutter has to provide better customer service to get customers back if they can. I am going to buy a 48" cutter and the copam is good but I fell I should go else where if I should need them for warranty I would end up getting mad because they just don't have the customer support they need. Unless they hear these things they might not take action?

kIMON, I have an eps I cut all the time it is a boat name and it cuts fine when doing small or 18" long I tried cutting one at 56" long and it cuts about half of it and then puts a cut line right through my vinyl all the way up ruining the vinyl I took the same logo and shrank it and cut it and it cuts fine what might be the problem?

Ok I will do the change I guess. I thought usb was the best? Anyway I have options like the 9 pin cable and I think I have the 9 pin with a cable that plugs into my mainboard I will have to install. I will ask tech support here if I can upgrade memory. I remember doing a big banner before and having some problems like this. If I can do a memory upgrade I will if not I will try the cable. Thank you Kimon

OK Kimon, I will try it soon and let you know I have vinyl to through away and will check if it is the same place each time. How do I upgrade the memory you mean on the copam right?

Kimon I sent you a zipped folder hopefully you got it?