KYSIGN
-
Content Count
520 -
Joined
-
Last visited
-
Days Won
4
Posts posted by KYSIGN
-
-
My guess is the line segments are seen as separate paths. You would need to join them somehow.
-
It could have been caused by a water repellant such as rainx. The temperature could have caused adhesive issues. I normally tell my customers to wait 72 hours before washing their vehicles to allow the adhesive to fully bond. I also try to avoid the wiper area entirely if possible.
- 2
-
Have you tried using the step and repeat option to create a few actual copies on the workspace?
-
New Rocker font is similar. Maybe you can use it as a starting point.
- 1
-
This is the first time I have used Siser Glitter HTV. I pressed at 320F for 15 seconds and peeled warm as per Sisers online instructions. It looks like some adhesive was left behind from the carrier. I have never had this problem from Siser easyweed. Any suggestions? Maybe I should peel cold or use less heat?
-
-
Lots of them popping up on a local fb group. They are already in a price war and racing toward zero profit. I haven't seen anyone offering copyright designs yet but it's only a matter of time.
- 1
-
You'll make quite a stain when they crush you for copyright infringement. Good luck with that.
-
They need to start selling cheese to go with all the wine. ☺
-
My graphtec has a lock to stop the rollers. You could probably use a piece of tape or a clamp to stop them.
-
Remember to pre press the shirt for a few seconds first to remove moisture. The color should return to normal as the shirt cools and the moisture returns.
- 1
-
-
Do you have the width listed anywhere?
-
If a website asks you to install a file converter or download manager it's probably malware.
-
The step and repeat window should work. I'm not sure if there is another way.
-
-
I would love a cheap 3d printer for personal use but they all seem to have poor reliability. It's always complaints about motherboard failure and/or extruder failure.
-
Tracking can be an issue at that length. Prefeeding the material can help sometimes.
-
It's easy to list on eBay. Most of the decal product images are simulated. You just overlay your design onto a picture of a wall or window and export to a web friendly format.
- 2
-
Wow. I can't believe I missed that. That's what I get for skimming.
-
What sign?
-
You could try putting the blade holder higher up in the clamp. I did this when I used a MH721. I had a gap roughly the thickness of a penny between the blade tip and vinyl.
- 1
-
File a copyright complaint with etsy regarding your designs. Report the Disney copyright violation directly to Disney.
-
"* Please note you cannot connect a cutter directly to an iPad to cut your designs. Cutting is currently supported by communicating to the desktop version of Sure Cuts A Lot 3 on your local network."
AT75 and AT65 Help
in Other Materials
Posted
I never had luck with plastic tape. They all seem to tunnel when exposed to any temperature or humidity change.