randyb
-
Content Count
214 -
Joined
-
Last visited
Posts posted by randyb
-
-
Signblazer, the problem is it's not recognized in device manager
-
Signblazer, the problem is it's not recognized in device manager,
When the printer is plugged into the keyspan , nothing happens?
-
I have a mh 721 that i have used for years on my computer with windows XP.
I moved it to a buddys house and cant get it recognized on his computer with windows 7.
I am using a keyspan adapter to go from serial port on printer to USB on computer.The keyspan adapter is installed and recogniized .
Any help is greatly appreciated.
-
I only have a 54inch cutter
-
I only have a 54 inch cutter
-
Is light grey available in wrap material?
Preferrably in air release material? -
I am looking for some light grey -air release vinyl?
Anybody ever see any? -
-
-
Sorry i posted in the wrong section.
-
15 inches by 30 inches
Sign vinyl
-
-
What do you guys recommend for transfer tape when using Oracal 651,used on race cars
I am thinking about trying the new
RTape Clear Choice AT75
-
Anybody turn this into single layer? .eps format
-
-
Looking for a Tasmanian devil in eps format?
-
Yes my MH has the ground wore from the base of the cuter to the stand.But i still have trouble and thinking of a better way to ground?
The motherboard is not attached to the cutter so i am not sure if it is grounded or if it would make a difference?The motherboard is attached with plastic clips so it does not contact metal.
I was just wondering if adding a ground from the cutter holder to the base or maybe even right to the motherboard?
What you all think????
-
Since static electricity is such a problem, .esp with the MH series that dont have wires going directly to the blade.
I have noticed on the TC model there is wires directly in the blade holder?From what i can see in pictures?
Anybody ever try to attach a ground wire to the blade holder on a MH series and then go the stand or somewhere?
-
How much memory does the SC series have?
-
I dont have $1,800 for the Roland GX24
-
Updating my MH-721
What do you guys recommand,creation P-cut or maybe a uscutter TC model?
$500 budget
-
Updating my MH-721
What do you guys recommand,creation P-cut or maybe a uscutter TC model?
$500 budget
-
I have decided to update from my MH-721 cutter
What do you recommend for a budget of $500
I mainly do race car graphics.
I was looking at the TC model?
Would my stand work and would my blade work since i just bought a clean cut blade?
Any advise is greatly appreciated.
-
Thanks again ,
I do turn my machine off when not in use.If thats what you mean, but i do not turn it off after every 1 cut?
I just talked to a buddy and we are thinking of updating, i am going to post a new thread.
Thank you again !!!!!!!!!!!!
Mh 721 not recognized windows 7
in MH Series Vinyl Cutters
Posted
I have the Tripp lite keyspan adapter, been using it for years because the USB port broke on the printer end. I moved the machine to a different house and computer with Windows 7