-
Content Count
243 -
Joined
-
Last visited
Posts posted by KageDesign
-
-
Lowered the Buy it now price to $1,400, still with free shipping
-
RELISTED!! Thanks to non paying bidder Ive lowered the buy it now price, and Im giving free shipping if you use buy it now.
-
I'm going to try this again, but on ebay. Here is the link to my press and all the extras on ebay.
-
Hey everyone, Im putting my heat press and all of my inventory up for sale as a package deal. I have only pressed 10 shirts with it since I recieved it a few months ago, and I just dont have the time to work with it at the moment. Im asking $1800 shipped UPS ground for everything which is $300 less than what I paid for everything not including the shipping. Here is a list of everything included
1-Stahls Hotronix 16x16 Auto opening clamshell press, Dual timer, for multiple presses on a single shirt. (either for pre pressing for moisture removal or multiple colors) Looks and works like brand new, because it practically is.
14-Anvil 5.6oz-White T-shirts sizes range from L-3XL
4-Jerzees 5.6oz-White Tshirts 4XL
20-Anvil 5.6oz-Red Tshirts L-4XL
16-Anvil 6.1oz-Charcoal Tshirts L-3xl
14-Anvil 6.1oz-Lake Blue Tshirts L-3XL
16-Anvil 6.1oz-Royal Blue Tshirts L-3XL
4-Anvil 5.6oz-Black Thirts 4XL
19-Jerzees 5.6oz-Tshirts M-3XL
2-Jerzees 5.6oz-Tshirts 1 is Medium 1 is Large
1-Tee Square it
1-Logo it
1-Teflon sheet
2-Logo Pads(lifts the shirt where the vinyl material is going to be pressed if your doing button up or thicker type materials)
1 4.9yd roll-Red siser easywed
1 5yd roll-Orange siser easyweed
1 5yd roll-Royal Blue siser easyweed
1 4.75yd roll-Silver siser easyweed
1 3yd roll-Yellow siser easyweed
1 4.5yd roll-White siser easyweed
1 4yd roll- Black siser easyweed
1 5yd roll-Green siser easyweed
1 5yd roll- Gold siser easyweed
1 5yd roll-Gray siser easyweed
Some of the boxes are opened on the ones I never used to show the customers what the colors looked like.
I prefer not to take paypal, I will accept Certified checks, cashiers checks, or money orders, but I will not ship until they clear my bank.
You can email me at reversedracing@gmail.com, or pm me with any questions you may have
Thanks
Kellen
-
-
Well, as soon as the snow went I away I got non-stop calls for signs. Its nice, but working 50-60 hours a week on top of doing all of this stuff at once is draining lol. anyway heres so pics. Ill be accenting the black letters on the bus, because the people didnt like the black all by itself, that I had tried to talk them out of
-
The driver listed is CTE630HPGL, thats the one that works for the pcut anyway.
-
Are you putting the machine back online after you finish your test cuts, and setting up the speed and pressure?
-
Check the set screws on your grit rollers and make sure they are still tight, if one of them is a little loose it will cause this because one is running faster than the other when the pressure of the pinch roller is down on it. They can loosen up during shipping, and if that doesnt fix it, open up the bottom and make sure the drive belts are still adjusted firmly, another shipping caused issue.
-
When I ordered my samples from oracal, it took just a little over a month to get them, I forgot I had ordered them until they showed up in my mail. That might be the problem, they send them through the U.S. Post office, and we all know how speedy they can be at times.
-
Thats a good looking shirt. We just got a press. What are you using for you graphic material. I dont like the tranfer paper we got it leave a discolored look around the image. Also where is a good place to get material.
Thanks
Tom
Im using Siser Easyweed, purchased through UScutter
-
Very nice lookin, Im working on a friends snow machine hood as well, I wish his was as smooth as that one. His has about 10 different vents and a bunch of different lines to work around.
-
Thanks everyone. The press was definitely worth the extra money, the saying you get what you pay for does still apply in some cases. Now hopefully I will get some orders in to start paying for it
-
-
Firefox seems to have gone down hill to me. Get google chrome, actually loads faster and runs web pages faster, with or with out cookies enabled. When I used firefox it seemed like my internet connection was lagging on pages like myspace or youtube, but doesnt do it at all with chrome. Firefox was a definite improvement over IE, but google chrome is a much better improvement over firefox. Its a very basic browser, and you dont need to have a ton of plugins to run java or flash videos .
-
If it was me, and I had the means to afford that equipment I might go for it, thats a pretty killer deal on that printer and cutter setup, and with the computers and software to run them, and materials to boot. But I would also be taking a look at the Roland Versacamm machines. A brand new one will run you about the same price for the SP-300v or $4-5000 more for the VP-300, both are 24" cutter/printer in one machine, but wont include any materials or the computer, but it does come with the software.
-
When I looked at the nodes, I notice that there were some right on top of each other, the one laying on top of the other is not connected to the main wire frame of the fonts or bee, but will cause the cutter to cut a line where it finds these nodes. Ive had this happen to a few designs Ive cut, if your using sign blazer do a node edit and look around the whole design for what what looks like a darker colored cross, they will be darker than the rest of the nodes. and delete them. But occasionally it will delete the node that is actually of part of the design and when you exit node edit it will have erased part of the design.
-
Do the lines that occur happen to start around the "Of Bullit County" ?
-
let go under aren't there plenty more insurance companies that will thrive with less competition - oh yeh we can't now we ARE the shareholders!
The main reason they tried to keep them afloat was the fact they hold the majority of the mortgage insurance on homes throughout the U.S.. So if they did go under who would pay the insurance on all of the foreclosed homes? Which is laughable in itself because saving them didnt really help in stopping the foreclosures from happing, and the banks that gave out the ARM's and started this whole mess in the first place would have made AIG or any of the other mortgage insurance companies go bankrupt anyway because all of the insurance money would have been spent in a matter of months...........Oh wait that already all happened once.................. So we give them more money to let them spend in ridiculous ways and they fail again less than 6 months later. AIG Exc. - "BONUSES FOR EVERYONE! We failed once and got away with it, why not try again?"
-
if you are going to do shirts, contact sanmar. their shirt prices are really low. and if you are lucky, they will have a warehouse near you.
bb
Thanks for the info Cutme, Ill have to check them out for sure.
-
Just ordered a new 6 in 1 digital heat press off of ebay, 12"x15" platen(kinda seems limiting but should be plenty for what Im going to be doing)with the hat, mug and 2 sized plate platens. Ordered 50 yards of siser easy weed from good 'ol USutters in 10 different colors and 84 blank Anvil 6.1oz blank tees in a variety of sizes and colors. I absolutely hate spending moeny, but I cant wait to get started doing shirts All in all only spent about $1200 to get it going.
-
Try unistalling and reinstalling signblazer, if that doesnt do, look at one of the posts that is stickied to this part of the forum and try downloading signblazer from that.
-
.eps is your best bet with signblazer. some .ai files have some issues importing, nut 9% of .eps file will import without issues.
-
The quaility isnt really going to be that good with it, at only 600dpix600dpi, Im sure it might be ok, but I would look for one that has a higher resolution capability.
Cricut blades, what degree?
in General discussion
Posted
They are 60 degree blades