Krookz

In signcut the controls will allow me to move the head. But the software dosnt cut right at all. I also re-read the drop comment. The cutter didnt pull out the drop, the weeding did Thank you both, I will give your suggestions a try. I created new circles in Inkscape and left the stroke on. It cut them out, but it cut two circles instead of just one. Could it have not cut it at all because I turned the stroke off?

Hmm maybe thats what it is! I tried all sorts of options minus the welding. Ill give that a go in a few and see if that does it. SB dosnt have a test function, nor any way to adjust where the head starts from what I can tell. Guess I need to check the help. Its pretty simplistic and old looking. Signcut I have had zero luck with, not worried about it since I only have a year sub This is all on the SC 25". I had trouble with the outer most drop, the center came off with the small border. The glue under seems to stick to itself a little. The other two came off perfect though. I was impressed it cut the dash's on the bottle

Here's another that I did. Had to cut the eyes manually, for some reason Inkscape/SB didnt like the circles I drew This one is out of some Oracle stuff, the first ones Greenstar

Yup he's Bender. Figured most wouldnt know

Ok guys the port replicator seems to have done the trick! Thank you very much. Im rather impressed at the detail... 6" tall

Ok the port replicator works, windows 7 installed it and I jumped on a router with the com port. Its a kensington replicator, com port shows up in windows as a Prolific USB-to-Serial Comm Port(com 7). Hope that does me, I will report back after work today

Ok I had a feeling about the serial connection. I just got back from digging through the pile of old IT junk in my server room at work. Managed to dig up some kind of port replicator. Going to see if I can jump on a Cisco router with it. Ill post back with my findings tonight, and whatever support says for any other poor souls like myself. Down with cRapple!