mxracer394

http://www.gkartgrafixonline.com/products_n_prices.html Do u happen to have race car templates?

What are u running the cutter speed and pressure at? Also what kind of vinyl are u cutting?

here is the sheen vector. beware.EPS

im trying to cut some oracal fluro. I cant get it to cut all the way thru i havelowered the blade and made no difference..pressure is still on 1g. i dont want to keep trying to adjust it cause that fluro aint cheap...any ideas

Yeah it is...I will post it tomorrow when I get back home

went from 1 to 150 on pressure and it turned out okay.... thanks for the help

is there a free version of illustrator?

So I need to change them from eps to version 8?

Ten four tbe fluro is 6mil. I figured lowering the blade would work.will try raising pressure tonighy

Must just be sb I cut it and turned out ok

i took a jpg image did the bitmap trace and it looked really good all the lines were straight...when i saved it and went to sb and imported the file. the image looked like crap the lines were all jagged and stuff...am i missing something

It gives me three choices when I save on inkscape....does that have anything to.do with it

Thanks alot that explains it better to me

Because some of the eps files I have look horrible...thought I would attempt to clean them up?... If I save a picture.off the internet...just jpg image, can I import to inkscape vectorize it then save as a eps....I guess im not exactly sure of the purpose of inkscape. I thought it was to clean up files

im confused lol....newbie here....if my file is a eps i cant import it into inkscape correct? if not i need to convert it to another type of file...make my changes then turn it back into a esp file and then open in sb?

thats diffenitely what i was talking about...thanks alot for that file

I have the same issue

What about the jk decal....? Sorry.for.jacking the thread

Where is the best place and brand off cheap florescent vinyl....this WI be for personal use so I dont need ths top stuff ya know....was looking at the economy from oracal

i tried it with the speed at 100 and adjusted the pressure some...i dunno what i did to make it different it was cutting small prior to the real slick vinyl...i looked it up and it apparently is wall vinyl

i have been cutting random stuff the last few days with 12x24 sheets i got...the last two i had left were mactac 8900 pro....when i tried cutting smaller stuff like 3x5 it was looking like crap...would tear spots and when i would weed it the lettering would pull off.. i havent had this issue before. i had the speed at 500 and pressure at 1 and 2g...was it just the vinyl or am i having some issues?

please delete

How come some of my files are black when I go to import and want show when I slect them and hit ok..... nothing shows up.Also I have a numbers clipart cd...how can I push the numbers together and not have it cut the part that is over lapped....like a 13 pushed together with no space between the 1and 3....when I cut it the part that the 3 covers up is also getting cut ontop of the 3

my badposted off my phone and when i went back it was still there thought i never posted

How come some of my files are black when I go to import and want show when I slect them and hit ok..... Also I have a numbers clipart cd...how can I push the numbers together and not have it cut the part that is over lapped....like a 13 pushed together with no space between the 1and 3....when I cut UT the part that the 3 covers up is also getting cut ontop of the 3