Buggie Pilot

welcome to the forum Raph

Joe, I have searched for the exact spec. that states 2" is the exact req'mt. The only thing I can find is what I para-phrased above (Federal Motor Carrier Safety Administration ......Part 390 General ). Could you steer me to the spec that calls out 2". I always like to have backup information (in case a customer asks)....thanks

SignBlazer/Inkscape

Federal Motor Carrier Safety Administration ......Part 390 General c) Size, shape, location, and color of marking. The marking must

Gildan, Jerzee, Fruit of the Loom athletic I would use Mossimo Supply if I could find it.

Thanks SKAA I veggies also........ I have been soooo busy these will help ALOT ...... thanks again

PRODUCE-----> ISLE 7 ................. jk ........I'm looking for the same thing. Trying to do a sign for the local Farmers Market. Post or send your single veggies. I'll do some weldin' and try to make some kind of salad for ya

You might try http://www.brandsoftheworld.com/ Search for "helicopter" or their company name. You might be able to use some or all of what you find . ___________________________________ ; insert suitable disclaimer on line above

If your cutter came with a pen accessory, you can draw your design on paper. This will let you see what the cutter will be cutting when you cut the real deal on vinyl. When I first got my cutter I used the pen often........ Til I learned more (paper is a lot cheaper )

I would try. Clean your blade , Check depth,

Sounds like your object is really small and your vinyl size in settings on your cutter screen (might be really WIDE)

There are 508 objects in 3 colors if you just choose to cut this file without welding them you would have many.....many little pieces This is also already vectorized Pete G

I believe both are great programs. As Jay states if you learned on the alternate program you would have the opposite opinion. I started with SignBlazer and have never used anything else. It does anything I want and it was free (actually I paid $275 for it but they threw in a free P-Cut )

Welcome to the forum. Your gonna love it here!

Todo your exact cutter is not listed in the cutter setup list in SignBlazer, and although SignBlazer is very easy, if I were you I would stay with what you have. Before you know it you'll be doin fine.

I can't tell unless you post your SignBlazer ( .SBD ) file. If I had to guess I would say the two wheels on the truck are seperate objects.

Real Nice Z. Thanks for posting the files too

Personally I enjoy distorted images and text under certain conditions !

+1 I went the screen press route ( damn hobby just got out of control ) but if I didnt have my press I would use plastisol transfers for quantity runs or intricate designs. I may be getting into making plastisol transfers in the near future ?

Did you save the file and a backup ? If you do get your file bak Select one of your images ( try the truck ) , view/wire frame , next hit node edit ......do all the lines have nodes ? if not your truck has more than one object. If that's not it, check the other objects the same way ..........sometimes if you group things and then ungroup them they will split into more objects then you think Good Luck

Welcome from Connecticut

Thanks for sharing........I believe it belongs on every bike

Thanks Jay .

thanks guys I too have a project for them.

That guy made my hair hurt to listen to.