-
Content Count
1,799 -
Joined
-
Last visited
Posts posted by cutme
-
-
put a pen in your knife holder and draw it on paper before you waste any vinyl.
bb
-
email sent
bb
-
to make the drop shadow in illy, click on; effect>stylize>drop sahdow. to make the text open line art; select no fill and apply color to the stroke, then adjust the stroke and outline the stroke. hope this helps
bb
-
select view in wireframe and you will see that all the bits are there they are just all black. try changing the color of certain items and see what you get.
bb
-
do you have your blade offset set to .25?
bb
-
care to elaborate on that statement?
bb
-
pm sent
bb
-
pm sent
bb
-
post up a pic and or the artwork and someone will be able to tell you why.
bb
-
i have had such good success with their multi cut, i decided to try their print n cut (maxim) with my roland printer. it takes a little trial and error to figure out the premask, but it works great once you figure out how to peel it from the backing. (hint; peel the masking off folding it over on itself) i threw away a few transfers before i got that one. i will take some pics tomorrow. anyone else here have any experience with it?
bb
here are the pics
-
i have had such good success with their multi cut, i decided to try their print n cut (maxim) with my roland printer. it takes a little trial and error to figure out the premask, but it works great once you figure out how to peel it from the backing. (hint; peel the masking off folding it over on itself) i threw away a few transfers before i got that one. i will take some pics tomorrow. anyone else here have any experience with it?
bb
-
how do you get reg marks i cant figure that part out
that is part of the print/cut operation. you can read all about it in the learning guide.
bb
-
try unchecking "selected only"
bb
-
cool graphic, what is the font? would yo umind sharing the vector of johnny?
bb
-
Thanks CutMe , I had never paid any attention to that & that will be useful . It works for me . I just reloaded SB from Jay's link ( UK with the patch ) & everything works great . Whenever the evolved SB gets released , I am sure things will work much better . It was over a year ago that I heard the lawsuit was settled & development was being done .
that's strange, i can get some of the characters to work but not the bullet point the op was trying to get.
bb
-
Yeah thanks i did know about that for circles. Im not looking for a separate circle i would like it part of the text. The button i have circled in the file below is the one i think should do what i want but its not.
what version of sb are you using? according to this page in the learning guide, you should be able to click on the bullet at the bottom of the screen and it will insert it, but i cannot get it to work for me.
bb
-
Does anyone know if there is a way in signblazer to radius a corner on a vector image?
what im looking for is a way to click 2 lines and enter a radius kinda like on CAD.
it doesn't work that way in sb. you can right click after selecting the rectangle tool and select rounded corners before making your rectangle. or what i have done before to round corners is use a circle as a guide and node edit your rectangles corners round.
try giving the learning guide a read through. you can find it in your program files where signblazer is installed.
bb
-
signblazer only recognizes ttf fonts.
bb
-
in the cutter screen, click on setup. check the box labeled advance page after job, enter a value and click ok.
bb
-
I don't know if you have bold garamond but if it will do, I sent it to you in your gmail email.
If you outine it, it may e wide enough
these zip files are dead, anyone have garamond three and garamond three bold they would like to share?
bb
-
if you want to see the previews for your vector files, and not have sbe make preview files of all your photos. keep the vector files in a seperate folder and do not open folders containing your photos with sbe. sbe only makes .pvw files in folders you open with sbe when you have the show previews box checked.
bb
-
I would rather lay it on top than punch it through. It's too hard to get it to fit exact and shrinkage is another issue.
Jay
use cast film and you don't have to worry about shrinkage.
bb
-
could someone please give me a complete idiots guide from start to finish, on how to punch through a graphic over another in signblazer, many thanks
Lorne
i will go one better than that. go to your program files and where signblazer is installed, you will find a learning guide. it has the answer to your question. or, you put one object on top of another object, select them both and select punch through weld. there is more to it, but that is the simple answer. READ THE LEARNING GUIDE
bb
- 1
-
try opening them in another sbe window and copy to clipboard, then paste into the window you are nesting jobs in.
bb
NEED: Printed Banner
in General discussion
Posted
man you guys are like sharks circling in the water.
bb