hwangstar

I'm using a parallel to USB adapter. I can't install the driver so I thought it would work. But my great cut cant do anything with the plotter

Yes I have tried them from there. idk whats going on. I'm using the USB connection and I thought it would automatically install the driver but all i get are errors

I just purchased the 24' zencut black series and I can't install the driver for it I have 64 bit drive windows 7. ASUS K72J ALSO I can't follow these instructions step by step. Theyre false \\\\\\\\2.1.2 Step 1: Connection Cutter control via USB Install cutter USB drivers, which were delivered by GCC. Please use the instructions given by cutter manual. Cutter control via COM port (serial) Make sure, that cutter and serial Windows port are configured identically. You´ll find this port configuration in the system Control Panel under: System/Hardware/Device Manager/Ports/Communications Port. Select via double click the respective port (e. g. COM1) and activate Port Settings. Default settings are: Bits per second: 9600 or 19200, Data bits: 8, Parity: None, Stop bits: 1, Flow control: Hardware\\\\\\\