-
Content Count
434 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by mikerob2334
-
Received my 3rd cutter and still problems
mikerob2334 replied to MaderDesign's topic in General discussion
Here John try this. This is the exact text and angle I cut. Facing my cutter it was positioned upside down text arc away from me. text test.EPS text test.EPS -
Received my 3rd cutter and still problems
mikerob2334 replied to MaderDesign's topic in General discussion
Mine cuts fine at RIGHT angles also. The problem comes in when the letters are angled. Use that font and arc the text then cut it and see what happens. -
You could do like mark said and find this: http://forum.uscutter.com/index.php/topic,21213.0.html One on there is REAL close. Or if you need an exact one use inkscape like sd said.
-
;D Nice! What program are you using for layout?
-
Received my 3rd cutter and still problems
mikerob2334 replied to MaderDesign's topic in General discussion
one more -
Received my 3rd cutter and still problems
mikerob2334 replied to MaderDesign's topic in General discussion
I've posted about the problem I'm having but never posted a pic. I've had my MH721 for almost 2 years now so it's not a bad run of cutters. The funny thing is I've never noticed this until now. Don't know if I'm paying closer attention or just because I haven't done a lot of things that are angled. I'm in MS, long way from Mader and A&P so I would say that rules out the power grid & a bad run of cutters. Also other people are having the same issue. So that leaves 1) Refines are succeptable to interference or 2) Refines ALL do this to some degree for some unknown reason or 3) Virus of some type through a file (don't know enough to know if thats possible?) Anyway, here are the pics of letters cut on my 721. These were angled, the ones on a right angle with the cutter did not do this. -
Anyone have any guitar hero templates?
-
The thing is, that's not others work. It's YOUR work, just their name and info. I would change the address and phone to a fake one. I'm sure there are a bunch of Horizon Cafes across the country so that's not a big deal.
-
glad i could help. be sure to post a pic of the finished product so we can see it
-
this is the one i saw
-
that's not a standard decal that I know of. I found a picture of a custom truck with that on it and just made that up.
-
soccer soccer.EPS soccer.EPS
-
baseball baseball name.EPS baseball name.EPS
-
Is this the one you're talking about? z88.EPS z88.EPS
-
Thanks Jay! If anyone has one for the xbox360 les paul, gh world tour wireless or the gh III wireless that would be awsome. Wrapped up already and I wanted to find these without having to unwrap 'em before christmas.
-
these? Challenger_Hockey_Styles.eps Challenger_Hockey_Styles.eps
-
From the file menu in signblazer, click import.
-
you would actually remove the white area after you cut it in black, leaving a hole
-
The 721 is a good cutter to start with. I got mine a year and a half ago on ebay and it's done everything I've needed to do with it.
-
Looks good like your alignment method
-
Welcome! You're at the right place to find helpful info & people. Good luck
-
thanks jay!
-
Not the logo, templates for the faces of the guitar controllers.
-
This is a good start for "general pricing". Also depends on your area. http://www.thesignexpert.com/TheSignExpert.com/Sign_Business_Free_RTA_Vinyl_Price_Calculator.html
-
Yep. Copyright is owned by Scentsy, Inc. If you do it you need to get a release of some type from them or be prepared.