malachiind
-
Content Count
114 -
Joined
-
Last visited
Never
Posts posted by malachiind
-
-
Sorry, Can't share image is copyrighted.
For the three big windows and the door I charged $150 plus install.
Install took about 2 hrs. This was my first one.
I installed the three big windows dry and the door wet.
Wet took a lot longer than I thought to dry out. Just used water,
will have to add some alcohol next time to speed it up.
Had to be real careful to remove mask as it wanted to pull up
all of the vinyl, so then I had to wait some more and try again.
All in all went pretty smooth with the dry, I think I'' stick to it
for now.
-
Guess I lost out on a few $$$.
I charged $10 for the artwork and then $8 ea.
-
The details of the pinup would cause the vinyl to start coming up. Tried all kinds of settings
with better results, but not good enough. I needed the eyes to look good.
Using the refine mh721. I think it was a combination of the vinyl and the cutter.
Same vinyl on the summa worked a lot better, but still wanted to come up.
Ended up cutting her seperately from the letters and worked perfectly.
-
Oops, sorry.
12" x 6"
-
UPS shows a week for ground delivery and $15
Let me know.
Thanks
-
-
-
I love it...
Went back to Missouri last June for a family reunion
and my brother set his up...great way to pass time.
Those look great.
-
I can turn it in a day, but then you have shipping, so it depends on where you are.
I am in So. Cal.
You? ...
-
I can get it to you for $4 sq/ft digitally printed with sewn hem and grometts.
-
Thank you very much.
-
-
I finally got it to work, but it still freezes after cutting.
I am also trying to cut some thermoflex and it puddles up a lot
when the blade is trying to cut. Anyone have any work arounds for this.
I just tried to cut on a friends summa cutter and had absolutely no problems.
Hope I can figure this out.
thanks for the help
-
Anyone have a nice diamond ring lineart?
Thanks
-
Yes, I am using the usb cable, but have had no problems up to this point.
As for the baud rate etc...where do I change that. It's been a while since
I set it up and don't remember any of that stuff.
-
I should probably also mention that it freezes up and won't respond either.
-
-
Refine Mh 721 has worked ok until now...
Trying to cut simple image, send to cutter it starts to send it
then freezes...I have several jobs to get out, so I need a quick fix.
I tried restarting and still does the same thing...
-
Here is what I came up with.
Looks like it will cut clean and nice.
good luck
-
You could try and reheat to remove, have been able to only once before and was quickly after pressing
or you could go to your supply shop and get a spot removing gun. Has some solution in it and sprays at
high pressure, make sure to adjust so you don't blow a hole in the shirt. Spray from the back side and it
should loosen the adhesive enough to get off.
No guarantees though.
-
Those are some good ideas, I am waiting to hear back from the client on
what it is he actually wants, rather than trying to figure it out.
I appreciate the help and will show you the final product once it is done
any more ideas are welcomed.
Thanks
-
Mens traveling team, No established colors or at least willing to change.
Been doing it for about 15 years. Just doesn't want the typical.
Started out as friends and turned into a traveling team, most of the
older guys are getting too old and so they are building it up with some
younger players.
Thanks
-
I have a client that travels on a basketball team.
Team Name is Down Low. They want graphics for the
vehicles and possibly jerseys. Something original.
I am at a loss for any ideas, anyone willing to help out?
Thanks
-
Thanks...
Decals
in Show your work
Posted
I hear ya!
The space is probably larger than what it looks like.
I used a square reg mark and just went for it, not bad
for a virgin...