Popeye
Members-
Content Count
468 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Popeye
-
Those will work nicely, as will the link Thanks
-
Make sure and let us know how you made out.. Thanks
-
I tried using a backing to start with and it never really worked well... I don't use a backing now, I just set the blade so it just barley cuts through and I've gotten excellent results. I was using a couple strips of masking tape over the cutting strip to protect it... that worked pretty well but I wanted something better. Picked up some UHMW tape and that seems to be holding up very well.
-
Yep that certainly does I don't know how I missed those.. searched yesterday and didn't see any. I'd like to have a few that have trailing flames. Thanks!
-
Best graphic software for a teen to start with?
Popeye replied to Benr98's topic in Off Topic Section
This company has a good selection and the price is right http://www.freeserifsoftware.com/software/DrawPlus/default1.asp -
I have a Pcut... but I cut card stock all the time. Most business cards and the card stock I use is .010" thick. I would think the Refine could cut it too.
-
You're more than welcome Having the blade and pressure set correctly makes a huge difference.
-
problems to cut wiht laser point please help apears lines cut ever in all files
Popeye replied to neo_puebla's topic in LaserPoint Cutting Plotter Support Requests
http://forum.uscutter.com/index.php/topic,3362.0.html -
We used to have problems occasionally.. switched to industrial strength software is 2003 and haven't had a problem since. I'd highly recommend it http://www.eset.com/products/nod32.php
-
size and weight of the box of Creation PCUT 24",
Popeye replied to riribarr's topic in General discussion
I just checked the box.. Shipping weight 38 lb. 41" x 15" x 16" deep -
Take a look at the top of this thread... looks of good info.
-
http://forum.uscutter.com/index.php/topic,3362.0.html
-
This may help http://forum.uscutter.com/index.php/topic,3362.0.html
-
Congratulations to a new beginning!
-
Looks like the gantry uprights are plywood? Gas pipe for linear rails..? What's the Z travel? Does a router come with it and what kind of accuracy can you hold? Thanks
-
Cutting through thicker material: Laserpoint 24" will not do it...
Popeye replied to neeboy74's topic in Pre-sale questions
I cut card stock on a regular basis. Once everything is setup correctly it cuts right through it.. I tried all different ways of cutting but the best way is to set the blade and pressure correctly... no backer or sticky sheet. I think the LP is the same as a Pcut except for the laser -
We made a "light rack" out of some conduit and fittings... has held up for about 6 years now. Conduit and fittings are fairly cheap, stronger than PVC too YMMV
-
Mine had the same problem, crashing SB because of certain graphics. I thought it was probably due to running low on memory. I don't think it's done it once since going to SB Pro. I have never noticed a problem with the toolbar.
-
I have no idea about their support.. I've been fairly happy with SB, even with a couple minor squawks. What "support concerns" do you have with SB ?
-
You're welcome Sultan, It wouldn't hurt to ask them.... got to have good dependable software to run these cutters..
-
There are two good threads about this... here's what Jerry posted "The longest time should be just a few minutes. Our biggest problem is SUPER AGGRESSIVE SPAM filters. Unless you add the registration email address to your email address book many times your Activation Code finishes up in your junk email folder. Check there. Or because of this we have added online registration to our website. After you enter the information you will see the Activation Code displayed on screen. Simply copy and paste into SignBlazer. Here is the link http://www.colorchromefirst.com/sbe_activate.htm "
-
I PM'd my email and a request for pictures and more info...
-
Design and Manufacture products for General Aviation. Got the cutter to make placards and cut-out poster board templates for instrument panels.
-
pcut 630 cant find home
Popeye replied to ghettocowboytx's topic in Creation PCUT Cutting Plotter Support Requests
If you go "file" then "work space setup" you can change the size of the sign/border As far as it taking off for parts unknown... If you select cutter what all do you have selected in the window to the left? Once the cutter window is open.. select setup.. What all do you have checked there? -
pcut 630 cant find home
Popeye replied to ghettocowboytx's topic in Creation PCUT Cutting Plotter Support Requests
Make sure you don't have something set in SB telling it to go there..