vectorman

some more

app taping on a digi print??why any way take a nice over lap of 5 cm dont be cheap othewise it can open

if i were u i would spiol my self with the 60 degree...life is short

its becouse of the sun my friend

glass or p.v.c

what do u think of dragons

i like it of center that is the way it sepose 2 b the image is greal but the hevy metal font is bad

take 8+ in israeloss

[/img] i fixed u the kid THEKID.EPS THEKID.EPS

my roland camm 1?

rigth naw i have the linoliume top that is already finish(from one year of use) im getting a new big one..and im thinking to use a glass plate which one is better to use

did u try a hair dryer?

i had the same qwestion my slf in my mind and i think that u can stick the paper whith a gloue sprey the one that u can easely remove afther-use 4 texstill industry.. on the venil and then cut it

nop just pay etention to the blade preshior make a small test if it peel easy-its good

afther some testing i use 60 degree all the time

im looking for recomendations of a good printer 1 meter wide with good qwalety & cheap ink to buy i want to add 4 my bis. i herd that epson Stylus Pro 9000 + answer to my desaier. i want to do some pics so eny info of a good forum of sealers (2hand) thanks ronen

who know what is the best taype of knife for small letters is it 30 degree or 60 degree

another offer is not to weed. take the letter block and aplly it to the surfece without weed it afther u stick it well then peal it. in this way uour letters wont move and your eyes will stay pt :bang:

:woohoo: :thanks: :woohoo:

esterdy i canged my knike to a 60 degree one and its cut beutifull RECOMENDED.

hallo latly i hade a barber shop to decoreit and he asked to apply the vinyl on the window from inside ,so what u see from outside is the internal (the side with the gloo) of the vinyl i yoused water only (mybe there were a bit of sohp leftovers) to aplly. the finel resolt wasent the best -all kind of whiat spots somebody have an idea haw i got rid of it did i needed to use alchohol or spirt in the job someone ever try to use oil for a perfect job? im trying to uplod an image but it seem noto work thank u all 4 youre time[/img][/img][/img]

HELLO CUTRIX I DONT KNOW ABOUT SBE BUT 4 GENERALL FIXING OF ALL YOURE COMPUTER USE "SYSTEM MACHANIC 7" IT MAKES A SMOOTH MAGIC'S (DAWONLOAD THE DEMO) SYSTEM

the couse of the white spots was moist that got dawn on the lower stripes from the upper one and locked inside the dry vinyl. the viynl reacted streange in some of the places -like the moist change the gloo of the viynil to white pawder,i tryed to use heat but it didnt help-every time i touch it it gon worse. my finel conculoshion is 1. not to thoch it eventoally it disapper espacially if it have good exposhor to the sun-in this case it was inside of a mall. 2.the vinyl was old: its a 3 years "interadhesive" which i guss layed a lot of time(normally i dont work white thise matirial i use "kemica"by tecmark) my sopllayer run uot from so he send me this nasty stuff.but no worries i got my free roll and belive me i throw all the leftovers from the "interadhesive" and israel is the place i live :snow:so i hope u guyes have a lovly hollyday ronen

this is a job that i made 4 a fashion shop every three monthes i replase the frame in a differnt color naw it's whait fallo the link http://picasaweb.google.com/shilat.shilot/UntitledAlbum/photo#5138562182378382402

its aroun 10 dayes afther and ther are still ugly whit big spots on it :notsure: i guss ill have to fix it... i took one slice off and the spot drayed fther 3-4 minuts,but the problen is to open the stripes get them dry and the to close them.even if i use heat most likly they will twiest i think the moiset stuck insied and coused the whit spotts