ryan1633@hotmail.com

Members
 View Profile  See their activity

  • Content Count

    11

  • Joined

  • Last visited

Posts posted by ryan1633@hotmail.com

  3. Posted

    I am trying to contour cut using arms and now all of a sudden after the arms detects the first mark it will try and move the vinyl to the next mark but it will only go half way and try to look for the mark.

    I have tired using my own cut files and the test arms file you can print and test from VM. Both are failing to push the page far enough to find the second mark. 

    Would anyone know why? 

     

    I have tried uninstalling and reinstalling the software 

  4. Posted

    Recently my new LaserPoint 3 cutter has been working fine. For some reason now when using vinyl master pro I am trying to do a contour cut using arms and now it wont work. The arms system detects the first mark and then when it moves the vinyl down to the next mark it stops half way. I have even tried using the test arms print out and it does the same thing. can anyone help?

  5. Posted

    Hello,

    Would anyone happen to know why the rotate button on the vinyl spooler is not working when I go to cut my contour cut? 

    I created a contour print and cut using vinyl master. I printed the job which was 45" by 100". I had to print the job sideways because of course my printer isn't 100" wide.

    Now when I go to use the saved cut file for this contour cut it shows in the spooler as too wide. I have had this happen before and I hit the rotate button which would tell it to just feed the cut in the other way to fit. 

    For some reason it will show as rotated correctly but when I click cut not and go to the arms lineup stage, it shows the width the wrong direction again. I swear I was able to rotate cut files before. 

    Please see images for more context.

    Thank you.

    cut2.PNG

    cut3.PNG

    cut1.PNG

  6. Posted

     

    Then ask UScutter or Vinyl Master.  No one here is doing that.  Some people use a sharpie, to make registration marks, so they can be read. No one here (only a handful ) who answers questions, even uses a Laser pointer 3. We are volunteers, answering questions, IF we can. 

    https://support.uscutter.com/hc/en-us/articles/360037576032-LaserPoint3-Contour-Cutting-Video

    Okay, I did ask support and they said play around with it because they have no exact answer lol. I was also thinking about drawing the lines but I don’t really know where exactly to place them.. or does it matter?

  7. Posted

     

    That cutter has ARMS, (AUTOMATIC REGISTRATION MARK SENSOR ) not made to manually contour cut. It uses a laser and automatically reads the registration marks. You could have purchased an SC2 and saved money, if you wanted to manually CONTOUR CUT.. "ARMS" is a BIG advantage over manually contour cutting. That is what Graphtecs and Rolands have to contour cut. Why would you purchase a cutter with ARMS, if your not going to use ARMS? ARMS  is way more accurate for contour cutting, than manual. That  is the BIG feature on Laser Pointer 3

    I am going to start using ARMS but I printed this job with the manual marks for my old mh cutter before it broke. I don’t want to reprint and laminate because it’s over 10 feet of material.

  8. Posted

    Hello, I have recently bought a laser point 3 after my mh series broke. I am trying to use the manual contour cut with vinyl master to manually plot out the printed ultra marks on my vinyl. The problem is that the controls on the software are not moving the cartridge so that I can line up the points. I have tried to even do the test calibration for manual cuts and they do not do anything either. Would anyone happen to know why it won’t control the cartridge from the software?

  11. Posted

    I have just come across this issue where when using vinly master pro and doing a contour cut using their ultra marks the vinyl will now roll off the cutter and for some reason the rollers will not stop at the correct length. I have tried everything and cannot find out why the vinyl is being pushed out of the cutter even though it says the correct length in the software. Does anyone have any ideas?

    Edit: Now when I try to test cut the box wont even complete. the cutter cuts one line moves over drops the blade and then stops. This all started after I started a cut and everything was going good until it started going off and cutting random lines. I hit reset and ever since the cutter has not worked correctly