bobbybuick

I got one from us cutter as linked .i like to put a private label on the inside of the shirts im currenting making, mostly giving away to friends .Adding a little personal touch .I used the mat yesterday on a 2 inch piece for the inside collar logo out of scrap and worked perfectly .thanks to all Bob

agreed but sometimes i might want a 4x6 or so .

ok so the pressure is the pressure weather it is agaist the mat or the ribbon and auto adjust to the fixed pressure point .i have mine set about 100 plus or minus according to what im cutting .thanks guys for the quick reply

question can you buy a carrier sheet for a cameo or cricut to cut the scraps .i find the cutting small pieces for a name or arm tag on a tee it would be helpfull. If so do you have to change the depth or pressure settings or will the machine compensate for the extra thickness thanks Bob

thanks for the advice will do

Hey All first post , Im new to this .I have had my cutter for about 3 weeks now .Thought i would share some ideas I had .First I am very limited in space in my home office so I had to go with the 28 inch cutter MH-721. I have been really impressed with the quality of the software ,support, and the cheap cutter i puchased .So far no issues limiting my production with a 24 inch width .Mostly T-Shirts and decals .So for storage i am using a coke 2 litre rack .I bought some to store pistons and rods on an engine rebuild, they work great for that as you can get them in 6 and in 8 . Also the stacking posts can be used for the transfer tape so a total of 11 rolls can be stored in a 10 inches wide area. Then I thought they should have made the cross bar on the stand horizontal.they could have made it a tray but I degress .As i wanted to store something under the cutter and still be able to move it .I purchased these drawers and used 2 pieces of aluminum angle i modified the ends to lay on the stand . I store my heat press accessories (cheap 8 in 1) in one and my shirts in the other one.i got them at the container store and it worked out great hope this helps someone else thanks Bob archive (45).zip