halima
-
Content Count
3 -
Joined
-
Last visited
Posts posted by halima
-
-
Hi Dakotagrafx,
Of course I use protective paper on the platen. When protective paper is new everything good. But after 3 press marks (like ink gasses) begins to appear on the backside of the fabric.
As protective paper I use sublimation paper or craft paper. Craft paper is better I have to change it after 5 press.
But when you have 2500pcs towel production it takes a lot of protective paper and a lot of time to cut it and replace it....
If I find a solution to avoid this marks or to only change protective paper every 50 press it would be better.
What kind of protective paper shall I take?
Thx
-
Hi everybody,
I have color marks on the back side of fabric after press. Most of the time with blue color. But with yellow too.
Kind of product: soccer jersey , towels
Printer: Epson SCF7200 720x720 2 pass Ultrachrome DS epson ink.
Press 200°C 40 seconds press time 3bars pressure
Underlay protection paper: i use used sublimation paper or craft paper
I try to increase and decrease pressure but with no result. Increase and decrease pressing time.
To avoid this problem I have to change underlay protection paper every 3pcs. But i'm loosing a lot time.
I have 2 press machine of 2 different brand. The problem is the same on the both machine.
Somebody can help me to solve this problem ? I 'm out of idea.
thx a lot.
Sublimation mistakes on backside of fabric
in Sublimation
Posted
Hi Dakotagrafx,
Thank you for your tips. Cause of you i have some new idea to test. I let you know. Thx.