phil lancaster
-
Content Count
27 -
Joined
-
Last visited
Posts posted by phil lancaster
-
-
will have a look and try it
thanks
-
Hi I have a creation ct 630 and sometimes it cuts a dotted line instead of a solid line I am using signlab 10
thanks phil
-
Will do i can test at 9600 but i think it is a test speed i maybe wrong i have seen a summa cutter for sale i an even thinking of replacing it
phil
-
no i have not will give it a go. is it best to increase it or set it to 0 all the settings are at default at the moment when it stops it takes some resetting
phil
-
Hi i have installed windows 7 and sign cut it sometimes cuts and sometimes dose not it will cut halt way through a job and stops displaying the comment "waiting" in the plotters doisplay it think i might call t a day and buy a diff make cutter as it is getting beond a joke the cable is inly 1.5 meters
phil
-
Hi i am using signblazer elemements on the com port in device manager and the baud rate is 9600 the baud rate in the keyspan assistant i am lead to believe is the test speed as when i reduce it to 9600and test it passes but it reverts back to the higher value after testing
phil
-
Hi i have managed to get the cutter to connect to the pc however when i send a small text saying test it cuts about half of it and then stops and displayes waiting in the display have you any ideas on what it could be
thanks phil
-
Hi will have got the computer and cutter talking well sort off
i have sent a small text saying test however it cuts a little and the stops and it displays waiting in the cutters display any pointers #
thanks phil
-
hi on the ext. loop back it failed any idea what it is for
phil
-
hi the cutter is stating that it is online in the display and the test speed can be lowered to 9600 i have tested it in both and it passes the test
-
Hi yes in the keyspan serial assistant it shows it is idle and the green light is flashing slowly prob once every second
phil
-
hi i ran the 9pin null serial cable to the keyspan connector and then the usb cable that the keyspan connector came with to the usb port on the pc
phil
-
still the same in signblazer i think will try artcut
-
It sates sending to cutter dand the progress bar moves but the cutter does nothing
phil
-
-
Hi Yes i did
phil
-
-
-
-
-
-
hi sorry its been a while i have been waiting for the keyspan adaptor
well it has arrived i have connected it and still no joy
this cutter will be the death of me
any ideas anyone thanks phil
-
hi thanks for the response i have just ordered one along with a null cable when it arrives how should i set the setting on the comm ports
phil
-
hi just an update
Well still at the end of my teather i have loaded windows 7 and sign blazer elaments 6 and still no response i have checked it in different usb ports and still no luck
when i look in device manager it shows the connection as usb serial converter and then usb serial port comm 3 and in the printer device part of windows that shows the devices connected it shows that the usb connection is to a unspecified device (This is were you can set your default printers)
i realy could do with some guidance as i have jobs to cut
thanks all phil
cutter sometimes cuts a dashed cut line
in Creation PCUT Cutting Plotter Support Requests
Posted
hi tried that it is still doing the same thing when it is cutting it pounces but the design is showing a solid line to cut
phil