phil lancaster

hi tried that it is still doing the same thing when it is cutting it pounces but the design is showing a solid line to cut phil

will have a look and try it thanks

Hi I have a creation ct 630 and sometimes it cuts a dotted line instead of a solid line I am using signlab 10 thanks phil

Will do i can test at 9600 but i think it is a test speed i maybe wrong i have seen a summa cutter for sale i an even thinking of replacing it phil

no i have not will give it a go. is it best to increase it or set it to 0 all the settings are at default at the moment when it stops it takes some resetting phil

Hi i have installed windows 7 and sign cut it sometimes cuts and sometimes dose not it will cut halt way through a job and stops displaying the comment "waiting" in the plotters doisplay it think i might call t a day and buy a diff make cutter as it is getting beond a joke the cable is inly 1.5 meters phil

Hi i am using signblazer elemements on the com port in device manager and the baud rate is 9600 the baud rate in the keyspan assistant i am lead to believe is the test speed as when i reduce it to 9600and test it passes but it reverts back to the higher value after testing phil

Hi i have managed to get the cutter to connect to the pc however when i send a small text saying test it cuts about half of it and then stops and displayes waiting in the display have you any ideas on what it could be thanks phil

Hi will have got the computer and cutter talking well sort off i have sent a small text saying test however it cuts a little and the stops and it displays waiting in the cutters display any pointers # thanks phil

hi on the ext. loop back it failed any idea what it is for phil

hi the cutter is stating that it is online in the display and the test speed can be lowered to 9600 i have tested it in both and it passes the test

Hi yes in the keyspan serial assistant it shows it is idle and the green light is flashing slowly prob once every second phil

hi i ran the 9pin null serial cable to the keyspan connector and then the usb cable that the keyspan connector came with to the usb port on the pc phil

still the same in signblazer i think will try artcut

It sates sending to cutter dand the progress bar moves but the cutter does nothing phil