criesner

hey the screenshot didn't show up. I didn't set up the machine but it looks like it's properly grounded with a wire going from one screw to another

is the baud rate the pressure controlled by the F+/F- button? the manual says if you hit the rest it changes it back o 960 the cutter is on the supplied stand, not sure how to check if it's grounded or not, someone else put it together

hey guys trying to get the us cutter mh 871-mk2 to work using inkscape. I can cut small 3" stickers correctly but when I go to cut something that's 20" it screws up. It leaves out about 25% of the cut and also adds it's own random cuts in. Very frustrating and wasteful. Trying to trouble shoot so tried different things where I made the document the correct size of the cut and also one where I just opened up the document, resized the sticker and didn't resize the document which gave a slightly different cut.. When i took the same document it was messing up on and resized it down to 2" it cut fine.. I'm using the COM cable port not the USB Any ideas?