Tay-Ra 0 Posted July 1, 2008 I'm not sure if that is the problem, but I'm hoping someone can help me fix this issue I'm having. I have a Refine MH1351 and am cutting a whole bunch of Calendars sized 14x17. Everything goes great until the very last HUGE final box around the whole thing...and it's like everything has shifted and so my border is warped. But everything INSIDE the border is fine and perfect, so I can't figure this out. I keep trying to make extra sure my vinyl is loaded straight and it seems like it is feeding smooth and straight until that last final box at the end! What am I doing wrong? Share this post Link to post Share on other sites
firemalt 10 Posted July 1, 2008 Are your pinch rollers on the very edge of the vinyl, or is one of the pinch rollers near the edge of the roller that advances the material(not sure what this roller is called). Share this post Link to post Share on other sites
Tay-Ra 0 Posted July 1, 2008 I have four pinch rollers and have them equally spaced along my vinyl. The outside ones are about two inches in from the edge of the vinyl. Should they be on the edge? Share this post Link to post Share on other sites
Knobhill 0 Posted July 6, 2008 I'm having similar issues with the boarder cut around my work. I now cut it by hand. Share this post Link to post Share on other sites
