jmoney 0 Posted June 17, 2008 Can someone walk me thru the proccess of how to cut two color lettering alls i want is like red withh black outline. Thanks Jason Share this post Link to post Share on other sites
Jay2703 704 Posted June 17, 2008 Go to the text function and create your text. Select your text. Select manupulate + Expand/Outline/Inline Check the Outline and Keep Original buttons Set your thickness and click OK. (Leave offset at zero) Share this post Link to post Share on other sites
jmoney 0 Posted June 17, 2008 Ok this could be a dumb question but when u put it together do you do them dry or wet Share this post Link to post Share on other sites
Jay2703 704 Posted June 17, 2008 If I lay them on top of each other on the application tape (for a decal to ship) I will use dry. If I apply them one layer at a time to a vehicle or banner, then it depends on the size. If it is small I will use dry if it is larger I will wet apply both layers. Share this post Link to post Share on other sites
Knobhill 0 Posted June 17, 2008 It all depends on the size and the way your applying it. When I apply to a vehicle in layers the first layer goes down dry unless the surface has too many compound curves etc, then the next go wet using clear application tape. The clear makes it much easier to register the top layers. When pre-assembling to be applied one piece, best to use clear backer and clear tape wet. My 2cts Share this post Link to post Share on other sites
firemalt 10 Posted June 18, 2008 For some helpful videos, go to youtube, and search for layering vinyl decal etc. Share this post Link to post Share on other sites
cas26rr 0 Posted March 5, 2013 THANNKS for the post. Brain dead tonight & could not remember how to outline. Getting old I guest. Share this post Link to post Share on other sites