yesrno1 6 Posted June 8, 2017 (edited) Can someone point me in the right direction. I'm trying to combine two vectors to make an American Flag Maltese Cross where the flag looks like it's blowing in the wind. I've tried a could use some help. I'm trying to come up with something like the last picture. Thank you in advance. Edited June 8, 2017 by yesrno1 added a file Share this post Link to post Share on other sites
skarekrow 1,842 Posted June 8, 2017 Where are these 2 Vector Files you are trying to combine? Those 2 you Posted are Raster... Here they are combined; (I can Zip you up a High Resolution copy if Raster is what you're after) Otherwise, post the 2 Vectors and I'll do the same for them. Are you planning to Cut or Print the Final? Key Word: GRADIENTS. 1 Share this post Link to post Share on other sites
yesrno1 6 Posted June 8, 2017 This what I've been able to do on my own. That was by scanning the image and trying my luck with my software vectorization. Then trying to clean it up. maltese cross america flage.eps Share this post Link to post Share on other sites
skarekrow 1,842 Posted June 8, 2017 MalteseFlag_03.svg MalteseFlag_03.eps If you don't need the Gradients, I can offer this; If you need the Realism that the Gradients in your Posted Pic provide, You'll be cutting MANY layers to achieve a ~somewhat~ similar look. 1 Share this post Link to post Share on other sites
skarekrow 1,842 Posted June 8, 2017 Happy 2 Oblige. You just take a Maltese Cross Vector and use it to Punch Out it's Shape in the Flag Vector and delete any unneeded parts. Share this post Link to post Share on other sites