CUTTING VINYL WITH PCUT

[lmasse8326 1]

CAN ANYONE TELL ME HOW TO USE SMALL PIECES OF VINYL, I'M JUST LEARNING AN WASTING TOO MUCH.

THANKS

[firemalt 10]

How small are you talking about?

Typically, I throw away anything under 6"x6". When I say "throw away", I mean, put in a ziploc bag and when the bag gets fill, I donate it to a church for kids to play with/cut out shape/etc.

[Guest sciondrgn]

What you may want to do is just use paper or card stock paper with the pen tool.. That way your not wasting vinyl while you play around with the graphics..

[lmasse8326 1]

Thanks for the idea of using just paper.  It seem the cutter feeds about six inches before actually cutting

the vinyl.  I wasn't sure it there was a way of adjusting the printer to cut immediately.

I appreciate your help.

[duke 12]

Thanks for the idea of using just paper.  It seem the cutter feeds about six inches before actually cutting

the vinyl.  I wasn't sure it there was a way of adjusting the printer to cut immediately.

I appreciate your help.

when you have vinyl ready for cutting, and your knife is where you want it to be, before you press online button--  press down button, then press up button, then press round button in the middle of the directional arrows, then press online button and cut

regards duke

[lmasse8326 1]

THANKS DUKE!!!