-
Content Count
56 -
Joined
-
Last visited
Posts posted by soldoutcreations
-
-
All this and you still haven't mentioned your problem so no way to help you anyways. BTW I'm only 39 so not elderly yet, just wore out:)I'll figure out what I'm looking to know but you guys were the problem...
What I have issues with I'll get it fixed appreciate your concern....
-
What has Graphtec tech support told you about your problem?MzSkeeter it don't even matter my point has been made on this
topic... I didn't post my problem in this forum and I won't worry about
it this go round either... Appreciate your concern anyway....
-
You posted your huge message above... but didn't even post your question that you needed help on ,, Interesting...Mz Skeeter I was emailing people questions I had here before posting to the
forum... I came to this forum and seen you guys was being sarcastic so I responded....
I emailed you about help before I posted on this forum... I wasn't gone say
nothing on this, but I felt you guys do this all the time and I just don't need you guys
doing me like that do it to whoever just skip over me...
-
Insult then ask for help? This should be interestingIf the truth means insult then I'll take the blame for that....
Let me know where I have not told the truth at? I post in respectful
manner... Sometimes truth make people feel offended I done nothing intentionally
for you to feel you have to defend yourself, but share my experience on this forum from
the first time I got here until now. Help will be found I'm a determined person with
patience, so I'm not worried about where I'll get help from. I just thought it was cool
to get it here as I find it so difficult and address you guys about how I find it so difficult...
-
What is so hard about using it that is so different from any other plotter? Enlighten usThis is why I inboxed people... This is why I hate posting on this forums....
What kind of question is this to ask when there are people here who
are having a difficult time trying to cut out their first project? But, to you
guys this is humor as this suppose to be a place to help people? Really?
-
I don't help huh? I have over 11,000 posts on here and only about 3 I have asked a question on.. I help plenty, BUT I don't do PRIVATE tech work for members... That is why I asked you to post to the forum...and I do the same for others who PM me for PRIVATE tech work.. I have a life, and just volunteer here, when I feel like it..Graphtec has tech support...they would love to help you.
Mz Skeeter I didn't post it here because I don't like how you people respond to me on this forum
so I inbox people when I need advice or help on something and so happen you ended up being one of the
persons I inbox... Telling me to post it on the forum is no problem at all... I can respect that... But, I hate
posting here due to how messy you people are. So, I been inboxing people as I said and you so happen
to be a person I inboxed...
-
I rather inbox people then post here often that's why I rarely post stuff on these forums...
What I posted was truth that's why it hit a nerve... I disappeared do to how you people respond
to stuff and be so sarcastic and messy. Just as it was when I joined... An there was people
on that forum agreeing with me as well if you remember. I didn't ask you for no recommendation I
ask you guys to be more professional to the people on this forum. Its the same problem I had when
I first joined this place so no need to rant at me discussing nothing about other people nor your shop
it has nothing to do with the points I made none what so ever... Address the stuff I spoke on not about who
came to your office that's no value to me at all. Or just drop the topic... I'm not ranting at all just being honest
and in a respectful manner with no anger at all...
-
Of coarse this machine can be simple if someone has been using it for a long period of time
what about people who are not so familiar with this machine. Gosh this is one forum that'sso difficult to communicate in I nearly hate posting stuff here honestly, cause the people are
so sarcastic and messy... More people I encountered like Roland over Graphtec and people here
are from all sides of the world so its not all the same for all people... Geeshh... This must be a place
of elderly grumpy people or something the way you guys take approach to things can be so unprofessional
seriously... Dakota, Jaybird, & Mz Skeeter there are people who come here looking for real help and to you
guys it would be something to laugh at people and crack jokes as I thought this was a community about helping
others. Smh... Maybe I'll just find another forums to become apart of.... I actually buy stuff from this
company I know my purchase will not matter much, but it will be others that will feel the same as I do on how this
forum is conducted the only option is to leave or watch yall attack others intelligence as if they're so dumb and
you all are so smart... Get real? You had to learn how to do this stuff yourself at some point, so don't laugh
and be petty towards others who want to learn. Bragging about having more feature ok what's your point?
Who is that helpful to besides yourself? All pointless stuff you guys need to lighten up... How do you have a rough
ride using a Graphtec....? Sarcastic and messy question some ppl come here are not pros and just want to learn stuff...
I know its more crazy because you guys are admin and laughing like I claim to be a Graphtec instructor... I'm not
instructor, but I know enough to help some people and I thought that's what this forum was about... I see "Staff"
cracking jokes laughing like they're somebody more special due to the fact they can work a cutting machine.
-
Set the origin point on the proper registration mark. The
GCRP can read the Regs manually from the control
plotter software. Read the marks manually, do not turn on the
search marks feature. See if that can you get over the ARMS problem...
Or you might have the marks too close to the top or too close the bottom the material.
Its ok to have less room on the sides of you material, but the top and the bottom of the
material must have some space. Take you registration marks in more closer if you're
having problems. I'm not sure bout the accurate measurements. Those marks can drive
you crazy, but its so many different reasons why things can be going wrong.
-
Where you having cutting problems before you used CM3
or you started out using CM3?
-
Be sure you are setting the media and orientation properly.
I had to uninstall CM3 it does not work on my laptop for
some reason. I have a Windows 7... It was to glitchy so
I let it go and went back to CM2 where I had no problems.
CM3 has a lot of new features I'll have to wait until they
fix the bugs in the current one as of now...
-
Graphtec Craft Robo Pro users....
How are you guys? I know using that machine
can be a rough ride seriously... I have some good use
from using that machine. I have lots of weird tactics I
use to make that machine work luxury
You need some help or got a question I can guild you
to a better understanding if you feel GCRP is a machine
difficult to understand.
I use Illustrator full time. I have no clue about Corel....
No clue about ROBO Masters ....You use Illustrator and GCRP... I can help you out
to over come some hurdles... If you can't figure out
from searching through Google... I might can help you out!
-
I got 3 likes on facebook from joining this forum....
4 emails on facebook asking me what equipment I use....
You ppl have the most meanest hospitality and still I learned
there are some decent people here I see the rest of
you people can stop trying to keyboard fight like cyber bullies
you people acting like some online thugs. Bone-rushing my thread like
its about to be a fight or something. Leave alone.... Everytime
I login HOT by my thread
-
i just saw 2 guys on the street selling heroine, therefore, it must be legal. looks like i have a new money making opportunity to tend to........You ppl took time outta your day to complain
about a person who done nothing to one person here.
I don't have to design as nobody see fit here... I design as
I please just as other designers do. I'm obligated to have my own lane
without you people swerving to far over in my lane. You people just upset
for nothing as if I came here and just disrespected everybody I have
had decent manners with all you people and still people are being disrespectful
on my introduction thread. Such a sad way to welcome somebody honestly maybe
I need to email US CUTTERS and take some screenshots to show how ignorant people
on this forum can be. I have nothing on this forum that breaks a rule. Nothing...
Still a flocks of bored people just posting mean stuff for who know why.... I surely don't...
I will not agree and abide by the rules none of you set. I design as I want... The quicker
you get that in your skull... Your life a be more at peace! It's sad you people can find the
time to sit up and discuss so much with a person you have not known even a day. Only
2 decent people from this whole forum. Even another member came to agree with me on how
you people got on here all trollish bunch of old grumpy people or something.... This crazy...
I hope admin can lock or delete this topic... I can really be rude to you people, but I'll be
the big guy and chill out. You people have to understand I don't need either of you... I just
know with my experience there are people online who can utilize my help. All this other stuff you
people on... Chill out....
-
Hey Im not here to say you are wrong or right I am simply taking up for some of the negative comments posted toward my forum "friends". Even my first post I was sincere and you come back saying "Some will get to know me over time and from the looks of everything most will just dislike me" in an assholish manner it looks like you got one thing right. If you aren't here to make firends, show off your work, or get advise then what are you here for?btw this isn't a group of haters. Very positive and encouraging group of people on here. When you come off strong and start making assumptions of how people view your work and yourself you will dig a hole that will be hard to get out of. I don't care that you have curse words and "rude" humor...I actually love that kind of stuff. And there is a "mature" thread on here that would be perfect for that. But just because a few people don't like what you do doesn't mean that no one does. Take a breath and think before for you post.
I'm here to help others as I said... I can see post from others... I will
give my best advice from there and keep it moving.... That simple...
If its not so much hate then how this post get all these other people
having so much to say about my work, as if everything I have are other people's
logo. Its totally not... Only 2 ppl been positive I seen so far out of 30 something post....
Only 2 people positive... Honestly.... It went from my work horrible to I use people logo....
I need to think about what I post? No.... I meant what I posted each and every word...
I am going to come off strong when all these people being negative. Nothing is assumptions
go read all these comments you will see why I said what I said.... I can't dig a hole here... Only
thing can happen is I get banned other then that I have nothing to lose here and I shop at US Cutters....
My point is I don't care who dislike what I do... I can't please the world. I'm not posting
sideways to nobody I am only replying to what's being said to me... Nothing more... No name calling, no
disrespect, nothing... Maybe I'm wrong in your eyes for replying back to these people, but I'm an
adult and I posted this topic so of coarse I am going to respond back...
-
No need to defend nobody.... Wild Goose you need help?
To forum attack me or something? I'm not here disrespecting
that man in no way... You people need to lighten up seriously....
-
In Wildgoose's defense this store wouldn't still be around if they sold unlicensed products...and even if they don't have them...they are only a RETAILER who sells Nike and other big name companies that are licensed to use the logos...they are NOT the manufacturer. If I made every logo my clients wanted Id be swimming in hot water just waiting on a subpoena...its not about making ever single person happy...its about YOU being happy and YOU need to be aware of legalities before you lose what you got.You are being very ignorant and making a negative impression for your first post. I guess you aren't here to make friends and I won't recommend anybody to come your way for help. Have a nice day and don't work too hard making "illegal" sales .
"The truth hurts but denial is what will kill you" - ABR
I don't just design stuff using people logos... The logos
I used was for sport fans. I have uploaded my work here and
its custom work. Nothing to do with logos.... I'm making a bad
impression because I have to defend myself against a forum of people
bashing me as if they know me or something about me. Go learn something about
what I do then speak. You know nothing... City Gear do replicate other company
logos into humor and other things... I didn't ask you to find me people to help...
What is wrong with you people? This is my introduction and it is respectable
I came to no one disrespectful. People are voicing their opinion and I reply in
a decent manner. I am not name calling or bashing nobody nor nobodies work...
I stated in my introduction I am not here to discuss my brand... You guys looked
right pass that, which I find so disrespectful smh....
Because I do designs for fans does not mean I sit around and sell copyright stuff
or steal others designs.... Obviously, you guys are just nit picking at me for some
reason
I'm doing something so wrong because I designed something for a NFL fan? Whatever
stop attempting to make me look like a idiot, because I am going to stand up behind my work
I don't need you to stand with me or against me... I got this!
-
Only thing I will say on this topic is do not post copyright material on the forum. It is against forum rules and like you said you can do whatever you want out in the world. All those corporate lawyers are really just paid to sit on their asses all day and no to protect the interests of the companies they work for.I will follow all rules here no doubt...
I ain't bothered about opinions to much...
I've been respectful no matter who has an opinion and it
will stay that way! I'm not trying to be a a-hole, but when its a
group of people posting at me... Nobody really being positive,
just seem like a load of elderly people who refuse to welcome someone
here openly and understand I am a person not a group.... I do not have
to fit in with the group of people here we are all different. I'm sure I will see
some stuff here I will not like. I will not go to throwing stones at somebody
for something I do not like. I'll just stay from it, move on, or leave it alone.
The people here to trollish... I'm not the first person to make a shirt
with curse words on it... Geesh....
-
Sold Out I guess I'm done trying to sugar coat things and pretty much done with talking to you, angry man. City Gear is licensed, bonehead. They pay for the use of those logos.You have no clue about City Gear That's pointless to go on about
-
Actually the NFL can tell fans that they can't order custom stuff if they are using their actual logo but that doesn't mean they don't still do it or that people still make them anyway. Regardless of any of that I didn't mean to get off on the wrong foot on your very first intro post sorry. And I actually try not to get going back and forth on things if I can avoid it. I was just trying to help you out. The forum helped me avoid a potential infringement early on with a parody of the Harley Davidson logo that I had worked long and hard on. I did a lot of study including talking with an attorney and in the end found that my case was defensible in court but would probably end up having to go there to be vetted and I didn't want to go to court with HD no way no how. I am sorry if I have helped to make your first visit with the forum a downer. If I see someone about to step into the path of a truck I usually try to give them a heads-up that's all.I've seen that logo replicated so many times for fans
the last thing I can worry about is the NFL... NFL can not
tell people how to spend their money. If a Dallas fan wants
to go get a custom shirt made to match a certain pair of
shoes or something.... You telling me the NFL has that much control?
Really? What planet are you on?
If they bother me I can promise they a bag up and
gone about their business. Usually their attorney
will send out a threatening letter if they feel you are
going to far with the usage of their logo. People flip logos
and brand names all the time without people getting sued...
I'm not sure how art is taken where you are located, but I'm
here in Memphis and sooooo many logos are replicated and
people are wearing them. Check out clothing in a store called
"City Gear" its a big time high end fashion store! You will see so many
logos and brands twisted and again nobody has to be getting sued...
This store has been open over 10 years I know... With locations
in so many cities.... People get copyright laws all twisted now a days...
-
You guys seem to not understand I don't care about all that going
back and forward this has nearly made me hate I sign up to
this forum. You people sound like a bunch of people with
complains and looking to whining about something. Just chill already...
Just go around the forum looking for something to bicker and
whine about
I see so many airbrushed NFL shirts if they nab me they will
have so many companies to nail, I'll report all the reproduced
logos from all companies here in Memphis.... Fans order custom
stuff all the time NFL can't tell fans not to order custom stuff.... NFL
can't watch all of its fans and then attempt to sue them for a logo
You feel its that serious then go tell the copyright police then since you
enforcing the law like a sheriff lets see if it's worth sending a lawyer
after me for 1 logo produced once....
-
Welcome to the forum. I too am a graphic designer working in Adobe CC...full time employed as a graphic artist/brand manager here in SC and do my decals as a side business. Although your artwork doesn't seem to be a big hit with a few people don't shy away from showing it....you know that is what this forum was created for . It's good to get feedback from others and no offense, but I don't think people will come to you looking for help if they don't know what you are capable of doing. I know several "go to guys" on here for questions but that's because I am familiar with the work they do and the knowledge they present of certain processes.This is nothing I am getting paid to do... Honestly... I will
help those I see I can help! I'm not posted on here like I get
paid to help people... Some will get to know me over time and
from the looks of everything most will just dislike me! I'm not about
to start designing what these people demand of me I hope they all soften
up and understand we are not from the same location. I live in Memphis, TN
the things you see are the type of people I get orders from it does not define me
as a person....
-
Welcome to the forum. I'm not here to critique you but will say that a big chunk of the forum are a conservative bunch (myself included) but I don't think it's my place to worry about your business. About the only words of advice I would give are that if you are posting NFL t-shirts on your facebook page I sure hope you're licensed or they'll be owning everything you got and everything your going to have. So aside from possible trademark infringement I commend you on your go-get-em attitude and the fact that you have muscled through and built a business and a skill set up from scratch which with AI and PS are big accomplishments all in themselves. Like moody said, this forum is a collaboration of a bunch of people very much like yourself in the entrepreneurial spirit of business and also in a trade that is often clandestine enough that it's really tough to figure out "How the hell did they do that?" You know what I'm saying? So welcome from Idaho. And before you ask, yes I am probably considered a country hick.I'm allowed to make custom NFL stuff... I'm not
allowed to make NFL products to sell them for my own
benefit. Darcare use Barney as paint to decorate the
building... Barney creators are not going around sueing
daycares. I figured I was in a place of mean people... I done
nothing to nobody posted a decent introduction and still here come
some people acting up like I pee'd in their coffee or something...
I nicely stated that I am not here to discuss my designs. They are
things other people ordered... Why shall I be held accountable for what
other people ordered... I do it because it pay my bills.... And its legal
-
Crude... Just saying. You are wasting your "Talents" and anyone here, even beginners can type a phrase. Poor choice of phrases if you want to make a first impression.You explaining to me what they're saying...
I'm not here to be in a talent show for nobody I'm
here to help people nothing more. Got a problem
with my talent? Stop looking at it... I understand what they
are saying. I'm not lost about the point you guys are making...
My point is... I don't care about that... I'm an adult this my life
I can do as I please legally... This my life let me live it and you
live yours... I got this... I'm not here to impress nobody... Again...
I'm here to help people not argue back and forward with people
over a opinion I could care less about... Nobody here pay my bills...
My talent do... Now be nice or go in general discussions and post about
all your anger towards my talent.....
Graphtec Craft Robo Pro issues
in GraphTec Cutting Plotter Discussion
Posted
I have some old ones sitting around... That needs a display fix... I'm looking for
possible ways to sell it for parts or to be repaired by whomever want it. Any ideas?