Brandon_Davis
-
Content Count
546 -
Joined
-
Last visited
Never
Posts posted by Brandon_Davis
-
-
Seems like there are mutiple resources for ICC profiles out there concerning the Mutoh after a quick google - good luck tracking that down!
-
Yeah... I think your correct Dakota...
I thought ShineRite was only Inter-Cal vinyl ...
-
What brand of material are you trying to print too?
-
What brand of material are you trying to print too?
-
Depends on how wide you need... You can get a new Solvent/Eco-Solvent 24" Printer for well under $16000.00
Used is always a good way to go especially if you can have ownership properly transferred via the machines serial number and have the option of re-warrantying the equipment.
-
Yeah I would go with a nice Powder Coat for a truly asthetically pleasing look - I know this is an older post but I was browsing and in fact I had a customer do the very same thing and it came out terrific!
VendettaVinyl - is a great name by the way!
-
Without more information like,
-Operating System
-Cutting Software
-Type of Cable used to connect cutter to computer
-Type of Cutter
It will be hard to point you into the right direction. Sounds like your assuming the settings should be exactly the same from computer to computer this can sometimes lead to a mistake in settings.
-
TomL has one! Maybe he will post on it... TomL where u @
-
:thumbsup:
-
I can understand this frustration...
-
Most cutters can easily accomplish what you are talking about - however in what QTY are you considering do these decals and will it be an ongoing project?
-
Hockeygirl is right - you should try to tweak the cutter because 651 cuts like butter and should weed even easier. Make sure you don't have waste vinyl bits built up inside the blade holder and that your blade depth is properly set - the blade should just be visible and a good way to test the blade depth is to take the blade holder in your hand and just run it across some vinyl with moderate pressure. Check to see the quality of the cut if it is satisfactory then stick it back into the machine and away you go otherwise continue to test and adjust. We always say half the thickness of a credit card for blade depth as well if that helps.
-
For a vehicle and if long term application is intended you may want to look at a higher performance vinyl for a vehicle like 751 truthfully...
-
Depending on the software being used to cut you might use either language.
-
Posted it to his other string...
-
Cute picture - I voted !
-
Checking the comm settings on the laserpoint was key - something really BannerJohn brought up first. For everyone out there the comm setting most often used are here in one of these attached pics. Also you can see the default settings I recommend - no weed line is good for the MH and Creation P-Cut / Laser Point as well. Anyway give these a gander, also the .025 offset can be helpful. Sometimes disabling the cut order in SignBlazer can also help avoid freezing and other hiccups...
-
Hey I am on my way home ... Let me get there and I will spill my guts on this issue!
-
Stay tuned for a comprehensive post Roy... Tonight - well tonight for me - LoL
-
We have not been able to connect over the phone... Time Zone issues...
We are working on a comprehensive post allowing for possible solutions due to issues we think may be causing your machines problems.
-
Good point - poorly written by me...
I was trying to convey that it potentially has the ability to exactly solve that issue.... I have one prototype of many so far that has my preferred adhesive tact and the right blend of flexibile vs. rigid play...
-
This is a creation so first thing you should do is check that the blade holder tightening screw is not over tightened so that it is rubbing into carriage cover... This happens all the time - not so tight guys!
-
-
Ramy ... That is a situation I have found many in and this would exactly help you with that - potentially.
2 month old Graphtec broke already? Help.
in T-Shirts and/ or Garments
Posted
Customers routinely claim issues with this model and send them back only to have us find no issue with them. Have you called into tech support yet, you can call us or call Graphtec for support.
I would suggest doing this ASAP to get an affordable resolution...