Imlost21

I purchased a new mutoh printer last December but I use a uscutter laser point 2 cutter. It has been working together perfectly for over a year. The I lost my production manager settings and I was able to get the printed back in but I cannot get the cutter in. Does anyone know what driver is compatible in the mutoh flexi version. I and attaching a screen shot of the choices it gives me. Thank you all so much for the help.

I only us the flexi mutoh edition to do all of my cutting and printing. I have vinyl master too but to many glitches in that software when trying to get a specific size. thank you for all of your help anyway, the version that I have is called "Flexi signprint Mutoh Edition

lol. and all I have is an older 15 ce5000-40 and that is not erven on the list of Graphtec drivers in the flexi software

nope the flexi I have was specifically made to only work with mutoh, so those are the only drivers in it. should I try to find the one that came with the laserpoint and install it?

"what is the brand of your cutter" Where the dropdown is it only gives me mutoh or Graphtec options

I do have a 15 in Graphtec but really need the laserpoint. if you can see the flexi version I have only gives me mutoh approved cutters? How can I get the laserpoint driver into the options. The flexi that came with the 54 in mutoh says it will only run mutoh or Graphtec cutters. please explain what I need to do to install the laserpoint cutter into the flexi production manager. thank you for your help.

the man who set it up was able to use a different driver that matched one that was available though the mutoh addition flexi. I know that the us cutter is not a Graphtec although I have a 15 inch Graphtec that I may be able to use for a job that I need to do today, I was just hoping that someone out there would know which Graphtec has the same properties as that us cutter. there is one I know since I have been running it for over a year. thank you

Does anyone know where I can find this font please I've been searching for dayzzz. thank you all so very much

Thank you all, I did end up tracing it, got pretty close. Again Thank you

will batman forever be close?

I've been looking for one very similar. if you get an answer please forward??

Hi again. Is there someone out there that can tell me why all of a sudden my printer would stop pumping ink into the lines. changed all the dampers, and even tried a new maintenance station and still cannot get any ink to the lines. is there another pump in there somewhere? I am sooo behind. Thank you.

Hi, I had a power outage due to Irma that fried my desktop. Now I am trying to hook everything up to my laptop pc. I am using windows 10, Flexi 12 RIP and a Mutoh vj 1204 Printer connected Via usb. # 1 is it possible to opperate the printer through my netgear router and tcp/ip? Ive never had any luck using the IP connection so I've just been connecting directly to the computer with a usb to printer cable. #2 I cannot get my laptop to see the connection at all. I cannot find a driver download. I thought last time I installed it the rj900 driver and it showed up in the device manager and I was able to connect that way but nothing this time. Device manager doesnt see anything when I turn on and plug in the printer. I added a printer port, but I can't remember how (it has been a while). Thank you for any advice you may have.

Does Anyone know what would make this cutter stop offering the contour drop option all of a sudden? no system changes were made. running Flexi 12. with Mutoh vj1204 printer. thank you all very much

All of a sudden, day before yesterday I sent to cut and it never gave me the option to go to registration marks. What can I do to fix this? Thank you in advance!!

Hi I have a Mutoh vj 1204 and a full black ink cart. When I received it the printer said that the chip was damaged. Is there anyway to recover this? I've been looking for a chip resetter but have not found one that would look like it will work. I've also snagged several chips from other black carts and I just keep getting error messages. Thank you.

Hi, I've been having so many issues with flexi lately that I decided to go to a different RIP software. My problem is, I need to know if there is anyway to change the .fs files to something else like .pdf or .eps or something else without having to go through 1000s of files and change them individually.

Hi, I am currently trying to get away from using flexi and just started trying to print from Vinyl master xpt v4.0 to my mutoh vj1204. I thought I had it all set up correctly but when I sent to print it cuts off half of the image. There are so many places to change the settings for page size that I may have put an incorrect number in somewhere. I've tried turning the image and resizing it but it still does the same thing. Last month I had an issue with too many registered so I removed them all (even though I had no idea that I had it on all my computers). And then VM sent me a link for a new download, Is it possible that the new file was corrupt? I've tried calling but just goes to voicemail. I leave a message with a call back number and do not get any response Back. Thank you for all your help

I have been using flexi sign pro 10 for several years. for the last few months I have been having issues. Now,,,, it will not let me mask. and if I distort a font I can no longer select it, and it will not let me grab multiple items at once. is there an update that I need? thank you in advance

I keep changing the settings. If I want a dark blue it prints black. if I lighten the blue then it prints the correct color but that wont work, I need it to print what I see on my screen. Dallas fans don't want royal blue.

I have since reinstalled flexi from the website and did NOT go back to windows 10. It has been running somewhat okay till last week. started making up its own colors now this. I cannot print the same images from files the colors never the same. grrr

I have been having tons of problems since trying the windows 10 update. I Removed it 3 days after upgrading. I have lost the ability to open my production manager, I can't get to the area that lets me contour after print. Ive uninstalled and reinstalled 3 times and still wont open. can someone point me in the right direction?? Thank you for any help.

That is what i am loking for. Something that doesnt need internet to function.

I am backing up all my files and going to try factory reset. I guess i will not be working this weekend. Is there a decent alternative to flexi. I would hate to have to learn a new program. I'm not crazy about having to rely on internet to operate thevsoftware installed on my computer. I would love to have the old 8 back.

they are tellin me that flexi 10 cloud will just quit working on any os later than windows 7.