ff958

I need to see if anyone here would be interested in giving me a quote for about 500 shirts screen printed. the design is pretty simple, 3 color full back and 3 color left chest on white t shirts. Pm me if interested. thanks

Thanks for the input guys, I never thought about google. Even tho I use it for about everything else. Still not sure which way I will go but now I have few ideas. Thanks again

I have a sign to do that id 6' x 8'. It is two color with the first layer is an oval that covers most of the sign. I will have to to that part in two sections because my cutter will only cut 42". What is the best way to do this without having a dark line or a gap. Any suggestions?

Yes there are. One is they have to have a 4 or 6 inch (can't remember which) white reflective stripe around the the truck. They also have to have 6 inch reflective stripes alternating colors in an inverted "V" on the back of the truck. It only has to cover 50 percent of the back. NFPA 1903 I think. I normally use 3m stuff for my reflective. My preference, but some depts. request it.

Have a look here. http://www.thesignexpert.com/TheSignExpert.com/Sign_Business_Free_Sign_Price_Calculators.html

Not only will it fade but after a while it will start to crack, and peel. No more that what the cost is you would be better off using 751. About the only time I use 651 is for short term use, yards signs, etc.

If all you need is a press them watch Craigslist I see alot of used presses pretty cheap.

I used this thing for the first time today on a livestock trailer and WOW this thing is awesome. It is nice to find something that actually works like they say it will.

The tennis ball trick works pretty good but nothing compared to this thing. Probably the best 50 bucks spent so far.

Thought I would share a recent experience I had with some Shinerite from Fellars. I just used some of their cast metallic, I think they call it permacast, it did cut ok but it felt more like Oracal 651 instead of a what I thought a cast vinyl should feel like. After using it think I will stick with Oracal, 3m or Avery. Just FYI not trying to put down the house brands, this was just my experience.

They have a few different packages that range from 4600 to 9300. I know that two of the packages come with a conveyor dryer, flash dryer 4/4 press all the odds and ends you need to get started as well as their flash unit. I just thought it would be a good machine for short runs, but I was hoping that someone had used it or knew someone that has it.

This system has probably been talked about before but I could not find it with a search so, has anyone had this or know anyone that does or did. I saw it at the NBM show on Friday and liked it because I work out of my basement and I only do orders of 150 or less. Anything else gets sent out. Just looking for some info good or bad.

I must not be as smart as the rest of you guys, I just export the file as an eps and a jpeg to a flash drive.

Try to weld the pic and then outline the image. Then turn on the cut mask for just the outline.

Had the same issues until I switched to a serial to usb adapter

Hello, from Indiana If you have already checked to be sure the your coms match up then get a usb to serial port adapter. I had all kinds of problems with my p cut before I did this.

Just wanted to see if this is a good printer to use for screen printing?

Sorry I should have made myself more clear. I would only be using this to make the screens not for actual transfers.

I have a customer that wants a illuminated double faced sign cabinet. Right now he has no sign where he wants this one so it will be the complete job minus having the electric ran to the sign, he already has a guy to to that part. I plan on buying a ready to install cabinet so all i will have to do is set the cabinet and apply the graphics. I have no idea what to charge for something like this. Any help would be great.

I will check them out. Thanks

How tall is the decal? I would be at 14.00 for a 24x6 RTA. As long as the design is not too detailed

We are headed up Friday morning.

I am planning on a saddle mount so I will need to set a post.

I knew I left something out. It is going to 4x8, it is also going to be mounted about a foot of the ground with a skirt around the bottom.

Are the bubbles between the layers of vinyl and not bottom layer of vinyl and the banner?