blade position

[okgraphics 0]

Hello all, was wondering if the blade goes in the front or rear position on the holder. Thanks

[thredz 1]

You can use it in either position.I use the one closest to the head track for cutting.And when I plot,I usually go with the one to the outside.

[okgraphics 0]

THANKS FOR THE INFO..

[thredz 1]

You're welcome.Have a Merry Christmas and a Happy New Year!

[marcuso 15]

Hello all, was wondering if the blade goes in the front or rear position on the holder. Thanks

The blade should be in the rear position for vinyl cutting.  If you are cutting through material (such as tint), you should use the front position which puts the blade over a fabric strip which won't damage your blade when you cut through the material (be sure to use a very shallow blade position).