DNA_Vinyl 262 Posted June 15, 2015 Does anyone own a COPAM or MUTOH cutter or something compatible? I need to know the dimensions of the blade holder. Share this post Link to post Share on other sites
30-284 86 Posted June 16, 2015 I have a copam that I can use for measurements, which dimensions do you need. When I needed more blade holders I just modified some roland holders that work perfect, just had to turn about .040" (if I remember correctly) off the bottom on the lathe. Share this post Link to post Share on other sites
DNA_Vinyl 262 Posted June 16, 2015 Length & Diameter please. Thanks a ton! Share this post Link to post Share on other sites
30-284 86 Posted June 16, 2015 This evening when I get home I'll get them, length from the shoulder down? Share this post Link to post Share on other sites
DNA_Vinyl 262 Posted June 16, 2015 That'd be great, thanks a million. Share this post Link to post Share on other sites
30-284 86 Posted June 17, 2015 Ok, it appears it is .427 in dia. and 1.026 in length measured from just under the shoulder. Hope that helps, the holders were a little hard to find when I needed some so like I said, I just machined ( I thought it was about .040 inch ) about .212 off of a roland holder ( they are cheap and plentiful ) and it has worked perfect since I made it. If you need any more measurements just let me know. Share this post Link to post Share on other sites
DNA_Vinyl 262 Posted June 18, 2015 thank you... So the reason I asked for dimensions is because I ordered the wrong blades. 9 of them to be exact. My blade holder is 3mm wider and 6mm longer. DAMN! Share this post Link to post Share on other sites