carlytorres 1 Posted September 25, 2012 Hi friends, I Need help pricing a 5 signs of 1/4 pvc , they are 16" x 5" . Are on one color vinyl and says "reserved parking (and the name of employees below). Share this post Link to post Share on other sites
HybridThread 14 Posted September 25, 2012 I would be around $12-$15 minimum. 1 Share this post Link to post Share on other sites
carlytorres 1 Posted September 26, 2012 I would be around $12-$15 minimum. Thanks a lot my friend! Share this post Link to post Share on other sites
carlytorres 1 Posted September 26, 2012 BTW what you recommend for cut the pvc sheets??? Share this post Link to post Share on other sites
HybridThread 14 Posted September 26, 2012 Well you should try to find them pre cut if possible. If you can't find them I really don't know how you should cut them. I have a CNC router that I would use to cut them, but to manually cut them from pvc, I really don't know. I'm sure someone on here should have the correct suggestion. Is it hard like PVC tubing? If so, it may be possible to make a pattern from wood or something semi rigid and score the PVC sheet and them snap the edges off then sand them down. Doesn't sound like it would be clean enough though. A jig saw with a fine blade would do the job and then finish with a sanding. A band saw would work with the right band as well. Again though, I'm not sure how perfect they would come out with these methods, and you don't want to melt it. Anybody know a good way to do this? Share this post Link to post Share on other sites
VinylDave 11 Posted September 27, 2012 http://www.bestblanks.com/signsubstrates.html Share this post Link to post Share on other sites