PBR Allstar 0 Posted February 16, 2012 I'm still learning the ropes here, but I'm pretty happy for day 5 of getting back into cutting! I have this logo I've been working on, but it needs a little cleanup and I'm kind of running out of talent! LOL! If someone could check it out for me, and maybe help me out with the outer ring as it got a little skewed at some point and it kind of got away from me. thanks in advance, this forum has been a great help so far, I'm really enjoying it! ford cook email: ford@fordcookdesign.com SFRV2.SBD Share this post Link to post Share on other sites
Jay2703 704 Posted February 16, 2012 Re-create the oval. Use Node Edit to remove the existing oval. Weld the new oval to the letters in the middle. Here is a video to show you how I would do it. http://screencast.com/t/40TpoyBmzqa Jay Share this post Link to post Share on other sites
PBR Allstar 0 Posted February 16, 2012 Thanks Jay. I tried that last night and I think the ratio of my elipse might have been off? It was late, I was tired and frustrated a little. I'll give it another stab tonight. Does the rest of the design look okay? This is my first paying job really and it is covering about half the investment of my cutter so I want to put out nice results. Thanks again, I wouldn't be able to be doing any of this without this forum! Share this post Link to post Share on other sites
Jay2703 704 Posted February 16, 2012 It looks good to me. Is your customer happy is what counts. Share this post Link to post Share on other sites
cutme 5 Posted February 16, 2012 put a pen in your knife holder and draw it on paper before you waste any vinyl. bb Share this post Link to post Share on other sites