nbeaton 1 Posted June 13, 2011 How long should you leave the press down if the ink is real thick on the paper or vinyl. and do i need to use the teflon sheet over the paper. Share this post Link to post Share on other sites
mr300s 1,272 Posted June 14, 2011 How long should you leave the press down if the ink is real thick on the paper or vinyl. and do i need to use the teflon sheet over the paper. You sometimes have to play around with a few to get them right but I usually go around 7-10 seconds then take a old tee shirt and when the press opens up I run the tee shirt a dew times back and forth and then peel slowly. I always use a teflon sheet on mine If your talking about JPSS paper that takes 30 seconds Heat vinyl is different I press easyweed for around 15 seconds then repress for half that time after I remove the carrier sheet 1 Share this post Link to post Share on other sites