tmates 0 Posted November 17, 2010 Now I have not yet started to use my printer with the new cobra inks (pigments), with jetwear dark premium transfer sheet. My first question is do I need to make any adjustments to the color for the printer or do I just use the photo quality. cut excess off leaving some of the outer film on. Do I stretched shirt a little before I press and a little after I press. Thank you for your assistance on this. V Share this post Link to post Share on other sites
mr300s 1,272 Posted November 17, 2010 I don't stretch mine but I think some do I haven't noticed any difference by doing it so I don't anymore. I use mainly jpss and I cut as close as I can to the design. As for adjustments I have my cyan @ +5 my magenta at +5 and my yellow @ -15 and set on high quality photo and plain white paper. Hope this helps 1 Share this post Link to post Share on other sites