nuttyboy 0 Posted June 6, 2010 hi all ive just purchased a used cutter and laptop from ebay ,when i picked it up the chap showed me the unit all working and it was all fine ,when i got it home i st it all up and done some basic cuts amd all was fine ,the all of a sudden it just would not cut ,i checked all the setting was ok ie ports ect and all looked fine but it still wont cut ,im using signblazer software , it all looks fine till i hit the cut button and the the dialog box just says sending data to cutter but the cutter dont respond ,ive even tried a new usb lead still no joy what am i doing wrong thanks mark Share this post Link to post Share on other sites
towman208 38 Posted June 6, 2010 just sounds like to me you are leaving the online button on. on the cutter it's self. Share this post Link to post Share on other sites
CRD 9 Posted June 7, 2010 http://forum.uscutter.com/index.php/topic,17489.0.html Clikc the link and book mark the manual that is in the first post! Probably your baudrate on the machine has been set incorrectly to 19200 instead of 9600. Paco Share this post Link to post Share on other sites
nuttyboy 0 Posted June 7, 2010 just sounds like to me you are leaving the online button on. on the cutter it's self. i thought the online was right Share this post Link to post Share on other sites